ep

December 4, 2020

WORM GEAR
Producer supplier exporter of worm gear

We warmly welcome clients the two in the home and abroad to contact us to negotiate company, exchange details and cooperate with us.
We specializing inside the manufacturing of Agricultural Gearbox, PTO Shafts, Sprockets, Fluid Coupling, Worm Gear Reducers, Gears and racks, Roller Chains, Sheave and Pulleys, Planetary Gearboxes, Timing Pulleys, Shaft Collars and even more.
Consist of 1 0.5 modulus brass worm gear shaft and a single twenty teeth brass worm gear wheel.
The transmission framework of worm shaft is simple, compact, tiny volume and light weight.
Worm Shaft Z1=1, turn a round of worm gear teeth, could get a considerable transmission ratio, normally in the power
CAST IRON WORM GEAR REDUCER
The transmission is stable, the vibration, impact and noise are small, the reduction ratio is significant, the versatility is broad, and it can be employed with many mechanical products.

It could obtain a large transmission ratio with single-stage transmission, and includes a compact construction. Most versions have greater self-locking efficiency, and can conserve braking gadgets for mechanical equipment with braking requirements.
Gears helps us by means of a mechanism of rotation between two axes to generate electrical power. So they, using the support of rotation following a mechanical concept associated to physics transfers velocity into energy. They could be of two sizes, one tiny and the other large, adjoining one another using the assist of teeth. The teeth are interlocked and bring about rotation.
WORM GEAR AND Positive aspects OF WORM GEARS
If amongst two gears a single is heavier along with the other lighter it is actually noted that the bodyweight turns into the terrific aspect to induce friction. In case the fat appears as well hefty rotation may be hampered resulting in inconvenience to move the machine with which they may be attached.

Distinct gears have distinct teeth. The teeth are inside a twisted form or in a straight form. It’s the action of a helical one particular to radiate motion among two shafts. Whereas the bevel sort has teeth according to conical surface. The shafts are under no circumstances parallel and intersected sharply in an angle.
WORM GEAR Speed REDUCER Field Pace REDUCER FOR Electrical MOTOR
Two or three reducers may be used to type a multi-stage reducer to obtain a terrific gear ratio.
A worm, in industrial parlance, is often a shaft using a helical thread. It really is generally a aspect of a gear that meshes which has a toothed wheel. Worm gears on the other hand, are these known as worm wheels. Sometime several people are confused with all the terms worm, worm gear and worm drive, considering that these three imply precisely the same issue.

Worm gears are important especially when there may be a need to cut back the gear size. It is the worm which has the capability for making the gear rotate and not the other way about. Together with the shallow angle on the worm, the gear will not possess the capacity to rotate it.

Types of worm gear

There are actually generally 3 unique types of worm wheels: the non-throated; single throated; and double throated. Non-throated worm wheels are people that do not have throats in each the worms as well as the gear. Single throated categories are these whose gears are throated. Lastly, double throated ones are these with throated worms and gears.

Worm gear traits

You will discover notable traits of the worm wheel. 1st, it has the capacity to transfer and carry load with utmost accuracy. It is also most effective for massive pace reductions. The efficiency of the worm gear, even so, depends on set up conditions, the worm’s lead angle, sliding pace, surface excellent and lubricant variety.

Creating worm gears develop into efficient

A procedure acknowledged as double enveloping tends to make worm gearing develop into a lot more effective. This technology enhances the current capabilities on the worm wheel. This prospects to improved accuracy and elevated torque. What can make the method so special is the fact that it might be made use of to produce better lubrication and style when loads are divided in each and every of the gear’s teeth.
Worm gear applications

Worm wheels make conveyor systems do its perform. Conveyors are tools to transfer 1 material from one spot to another. Aside from conveyor systems though, the worm wheel can also be utilized in substantial overall performance cars.

ep

December 2, 2020

Carbon Steel And Stainless Steel Conveyor Chain Hollow Pin Chain
Transmission chain(Driving Chain), Conveyor Chain ¡§C roller chain, Engineering Chain, Stainless Steel Chain, Lifting Chain, Agricultural Chain, Forging Series, Cast Iron Chain.

Hollow Pin Chains 08BP 40HP, 50HPSS, 60HP, 12BHP, 80HP, C2040HP, C2050HP, C2060HP, C2080HP, HB50.8, C2042HP, C2052HP, C2062HP, C2082HP, C2042H-HP, C2052H-HP, C2062H-HP, C2082H-HP
Stainless Steel Roller Chain Stainless Steel Conveyor Chain
Stainless Steel Roller Chains,Stainless Steel Conveyor chain, Stainless steel chain for bottle conveyor line which is utilized on bottle filling conveyor lines, other normal ss chain or special ss chains (SS304 chain, SS316 chains, SS316L chains, SS conveyor chains, SS304 conveyor chain, SS316 conveyor chain) all available
Rust 304 Stainless Steel Chain/Lifting Chain
Rigging Hardware, In excess of 1000’s Assortment. Like Connecting Website link, Safety Hook, Eye Hook, Clevis Hook, Master Website link, Master Hyperlink Assembly, And so forth.
Series Zinc plated Agricultural Transmission Chain for Feeder house Clear Grain
Attachment: K1, K5, K19, K30, K39, 220B, F4, F5, F14, F45, G18, TM91E, TM92, C6E, C11E, C13E, C30E, CPE, LV41N,
Surface Therapy: Shot-Peening, Zinc plated.
Application: widely used in Feeder house, Clear Grain, Return Grain in agricultural machine.
CC600 Corrosion Resisting Cast iron Chain
Our CC 600 Conveyor chains are manufactured in malleable iron with steel pins, with pins which are unhardened. This verified design and style leads to an assembled chain that is definitely remarkably long lasting and wear resistant. Developed withing the gasoline bottling marketplace (Exclusively Liquid Petroleum Gas ) our CC600 series stays a merchandise of initially selection for distributors and finish end users alike, where a top quality merchandise is needed very first time, each time. The CC600 chains are intended for use in multistrand conveyors handling individual loads under ailments of mild corrosion. They’re usually supported in channels and are very flexible, permitting for fluid motion and flexibility when demanded. This versatility makes it possible for them for being utilized within a selection of heavy duty applications but their major application is from the bottling market in which they’re termed on to deal with crates and fuel bottles.
specializes in producing all kinds of mechanical transmission items and hydraulic transmission products, such as planetary gearboxes
Chains are series of linked hyperlinks or rings which can be generally created of metal and might be connected or fitted into one another. Just about every piece of the chain can have in excess of one link based on its application. Some employs of chains is usually for fastening, binding or supporting objects. The two most common designs of building chains are roller chains and those that are torus shaped. The type of the chain relies on the application from the chain. Torus shaped chains are very popular in lots of applications. They will be applied for hoisting, securing or supporting and also have an exceptionally basic shape of rings which might be connected to one another. This straightforward layout offers these chains versatility in two dimensions. Their basic design and flexibility permit them to get utilised for a lot of tasks this kind of as securing a bicycle

Roller chains are extremely popular in bicycles. They are made to transfer electrical power in machines. Taking bicycle chains by way of example, they’re intended to mesh with the teeth from the sprockets with the machine. Flexibility in these chains is additionally restricted because they can only move in one route. Some prevalent applications of chains might be as vital chains, snow chains and bicycle chains.
As stated earlier on this write-up, bicycle chains are roller chains. They transfer electrical power from pedals towards the drive-wheel that in turn propels the bicycle forward. These chains are normally produced from plain carbon or an alloy of steel even so some is usually nickel-plated to be able to prevent rust. These chains are also viewed as for being very energy productive. Though numerous folks might assume the efficiency to be greatly affected by the lubricant, a examine that was carried out in the clean laboratory exposed that as an alternative to lubricants, a bigger sprocket would deliver a more efficient drive. Also, the increased the tension from the chain, the far more efficient it could be.

Bush Hog Gearbox Rebuild Kit

ep

November 26, 2020

single row 4 stage contact ball slewing rings is composed of two seat rings, which style in compact structure and light weight, steel ball speak to with the circular raceway at four points; it might bear the axial force, radial force along with the tilting minute in the similar time. Coresun drive Single-row 4 stage get hold of ball ring has the attributes of compact in design and style, and light in fat. The balls roll about the circular race at 4 points, so it could undertake the axial force, radial force and tipping minute with the identical time. This series of 4 level contact ball bearings are ideal in many engineering machinery, for example rotary conveyor welding operation machine, modest cranes, modest and medium-sized excavators,slewing conveyer, welding manipulator, light and medium duty crane, together with other construction machinery.
Three varieties of this kind of single row four point make contact with ball slewing bearing:
A. With no gear bearing (non tooth)
B. External gear bearing (external tooth)
C. Inner gear bearing (inner tooth)

double row different diameter ball slewing bearing is primarily made up of in-up ring, in-down ring and outdoors ring, so balls and spacers might be immediately discharged to the upper and reduce raceway. In accordance with worry ailments, bearings are arranged to two rows of balls of various diameter. This assembly is very handy. Angle of the two upper and decrease raceway is 90??so bearings can bear large axial force and resultant torque. Bearing desires special layout when radial force is 0.1 occasions more substantial than the axial force. Substantial in sizes and characteristics compact in style and design, bearings are specifically application in handling equipments requiring medium over diameter, which include tower crane and mobile crane.

single row cross roller slewing ring is mainly manufactured up of inside and outdoors rings. It capabilities compact in style and design, light in fat, small in assembling clearance, and large in putting in precision. As the rollers are crossed arranged by one:one, it’s appropriate for high precision mounting and capable to bear axial force, radial force and resultant torque concurrently. This series single row crossed roller slewing bearing have broadly application in lift transport aircraft, development machinery, and military merchandise.
one. Skilled gears producer
two.Experienced in Cooperate with massive Firms
three. Qualified gears Engineering Capability
four.Steady gears Quality
five.Affordable gears Prices
six.Modest gears Orders Accepted
seven.Constant gears good quality enhancements
8. Substantial gears excellent Efficiency
9.Brief gears lead time and shipment
10.Expert gears services
We will create 6 patterns of slewing bearings in the variety of specs with diameters ranging from 400 mm to 5050 mm. Our merchandise show just about every day to get crucial structural and connection elements used in wind turbines, excavators, mobile cranes, harbor and shipyard cranes, robots, healthcare scanners and generally mechanical engineering.
Good quality Management:
High-quality will be the important to our good results. We’re committed to attaining customers’ satisfaction by providing high quality products and services.
We be sure that our detailed top quality management system is in accordance with ISO9001 standard and is carried out effectively.
In pursuit of high-quality raw elements, we undergo a stringent verification and assortment method to pick the top suppliers of forged rings and various components in China. If required, we will also apply additional large-diameter forged rings generated by ThyssenKrupp in Germany.
Cranes are uniquely constructed, which suggests the slewing ring bearing is an essential component of its style. Quality and precision through the manufacturing procedure.
Gear transmission refers for the device that transmits motion and electrical power from your gear pair. It is the most extensively applied mechanical transmission method in present day equipment. Its transmission is additional exact, higher efficiency, compact structure, reliable operation and prolonged service life.Our gears might be heat treated, hardened, oil immersed in accordance with buyer demands.The gear is broadly utilized in industry, automobile, energy equipment, motor, bicycle, electrombile.

ep

November 25, 2020

single row four point make contact with ball slewing rings is composed of two seat rings, which layout in compact structure and light excess weight, steel ball contact together with the circular raceway at four factors; it may possibly bear the axial force, radial force as well as the tilting moment in the same time. Coresun drive Single-row four level contact ball ring has the functions of compact in style, and light in bodyweight. The balls roll about the circular race at four points, so it may possibly undertake the axial force, radial force and tipping minute on the similar time. This series of four stage get hold of ball bearings are ideal in lots of engineering machinery, like rotary conveyor welding operation machine, little cranes, smaller and medium-sized excavators,slewing conveyer, welding manipulator, light and medium duty crane, together with other building machinery.
3 sorts of this kind of single row 4 stage speak to ball slewing bearing:
A. Devoid of gear bearing (non tooth)
B. External gear bearing (external tooth)
C. Inner gear bearing (inner tooth)

double row various diameter ball slewing bearing is primarily produced up of in-up ring, in-down ring and outside ring, so balls and spacers may be straight discharged in to the upper and reduced raceway. In line with pressure conditions, bearings are arranged to two rows of balls of different diameter. This assembly is incredibly practical. Angle of each upper and decrease raceway is 90??so bearings can bear massive axial force and resultant torque. Bearing demands distinctive style and design when radial force is 0.1 instances larger than the axial force. Substantial in sizes and options compact in design, bearings are specifically application in handling equipments requiring medium over diameter, such as tower crane and mobile crane.

single row cross roller slewing ring is primarily manufactured up of inside and outdoors rings. It characteristics compact in style and design, light in bodyweight, small in assembling clearance, and large in putting in precision. As the rollers are crossed organized by 1:one, it can be ideal for high precision mounting and capable to bear axial force, radial force and resultant torque simultaneously. This series single row crossed roller slewing bearing have extensively application in lift transport aircraft, building machinery, and military products.
1. Qualified gears producer
2.Knowledgeable in Cooperate with large Corporations
three. Qualified gears Engineering Capability
four.Secure gears Good quality
five.Acceptable gears Prices
six.Modest gears Orders Accepted
seven.Constant gears excellent enhancements
8. Large gears high quality Overall performance
9.Quick gears lead time and shipment
ten.Professional gears support
We are able to develop six models of slewing bearings in the range of specs with diameters ranging from 400 mm to 5050 mm. Our products prove each and every day to be crucial structural and connection aspects used in wind turbines, excavators, mobile cranes, harbor and shipyard cranes, robots, health care scanners and in general mechanical engineering.
Excellent Management:
Good quality is definitely the vital to our achievement. We are committed to reaching customers’ satisfaction by providing good quality services and products.
We be certain that our complete high quality management technique is in accordance with ISO9001 conventional and it is performed efficiently.
In pursuit of high-quality raw materials, we go through a stringent verification and variety course of action to select the best suppliers of forged rings and other components in China. If required, we can also apply more large-diameter forged rings developed by ThyssenKrupp in Germany.
Cranes are uniquely constructed, which suggests the slewing ring bearing is definitely an critical component of its style and design. Quality and precision during the manufacturing system.
Gear transmission refers for the gadget that transmits movement and power from the gear pair. It’s the most extensively used mechanical transmission process in contemporary gear. Its transmission is more accurate, substantial efficiency, compact construction, reliable operation and extended support life.Our gears is often heat treated, hardened, oil immersed in line with purchaser wants.The gear is widely used in field, car, power equipment, motor, bicycle, electrombile.

ep

November 23, 2020

Nylon gear racks is made use of on sliding gate, There is certainly steel core inside it. we exported to Europe in big amount.
There’s steel core inside the nylon gear rack.There are actually two items accessible. There are four eye(four bracket is light form) and 6 eyes(6 brackets is hefty kind).Each and every piece of nylon gear rack with screw set
Manufacturer supplier exporter of gear rack
We exported gear rack in massive quantity to Europe, America, Australia, Brazil, South Africa, Russia etc. There is conventional gear rack out there and also special gear rack as per your drawing or samples. Our gear racks made by CNC machines
There’s several sizes of steel gears rack for sliding door also. M4 8?¨¢30, M4 9?¨¢30, M4 10?¨¢30, M4 11?¨¢30, M4 12?¨¢30, M4 20?¨¢20, M4 22?¨¢22, M6 30?¨¢30 and so forth
For M4 8?¨¢30, M4 9?¨¢30, M4 10?¨¢30, M4 11?¨¢30, M4 12?¨¢30, 1M length have 3 bolt,nut, washer sets and every single 4pcs or 6pcs packed into carton box and then put into steel pallet. For M4 8?¨¢30, M4 9?¨¢30, M4 10?¨¢30, M4 11?¨¢30, M4 12?¨¢30, 2M length have 4 bolt,nut, washer sets.
We are able to also provide the sliding gate part this kind of as sliding door pulley, wheel, roller and so on. Please kindly check out and let me know your detail request
Should you will need 2M or 3M, or every other length, we will create as per your requests
The majority of our consumer will send us drawing and we can create as per your drawing or sample.
We produce Module M1-M8 racks, CP and DP British conventional racks. The maximum length on the rack is 2 meters. Our solutions have been widely used in many fields this kind of as automatic doors, window openers, engraving machines, lifters, escalators, automated warehousing, foods machinery, energy resources, machine tools, precision transmission, and so on.

We exported gear rack in huge quantity to Europe, America, Australia, Brazil, South Africa, Russia and so on. There exists regular gear rack accessible and also exclusive gear rack as per your drawing or samples. Our gear racks created by CNC machines.

Our gear racks are applied for window machine, engraving machine, lift machine, opener rack, CNC machine, car, industrial usage so on.
one) Our gear rack is created as per DIN specifications by CNC machine
2) The stress angle: 20??/14.5??
3) Module: M0.4-M36/DP1-DP25
4) The maximum length might be 3500mm
5) The materials may be Q235, C45, SS304, SS316L, aluminum, copper, nylon and so forth.
Our gear racks are made use of for window machine, engraving machine, lift machine, opener rack, CNC machine, car, industrial usage so on.
Industrial Gear Rack
Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua.

We can also supply Development lift gear rack,American conventional gears racks,steel gear rack,helical gear rack,flexible gear racks,power steering rack,steering gear rack ,stainless steel gear rack ,round rack gear ,nylon gear rack ,spur gear rack ,boston gear rack ,audia gear rack ,gears racks ,rack and pinion gear
1. Wealthy field expertise due to the fact 1988.
2. Broad organize solution line, like plastics sheet/rod/parts/accessories: MC NYLON, OIL NYLON, POM, UHMW-PE, PU, PETP, Computer, PTFE, PVDF, PPS, PEEK, PAI, PI, PBI ect.
three. Manufacture, layout and processing services as per your demand
1. Excellent Tensile power;
2. High influence and notching effect power;
3. Substantial heat deflection temperature ;
4. High power and stiffness;
5. Excellent glide and limp dwelling characters;
6. Excellent chemical stability towards natural solvents and fuels;
7. Resistant to thermal aging (applicable temperature amongst -50??C and 110??C;
8. Size alternation by humidity absorption have to be considered;

Shaft sleeve, bearing bush, lining, lining plate, gear;
Worm gear, roller copper guide rail, piston ring, seal ring, slide block;
Spheric bowl, impeller, blade, cam, nut, valve plate,
Pipe, stuffing box, rack, belt pulley, pump rotor, and so on.rack pinion gear for elevator in stockoperator Steel and Nylon gear rack SPUR GEAR RACK AND PINION nylon gear rack iron gear rack We warmly welcome clients each at your home and abroad to get in touch with us to negotiate business enterprise, exchange details and cooperate with us.

ep

November 19, 2020

IN CNC GEAR Manufacturing PLANT, More than Ten OF GEARS Building LINES:
Gear turning,hobbing,shaving,shaping,grinding,slotting,
broaching , we?¡¥ve produced significant investment..

Our substantial precision gear can hold a substantial quality prodcuts.CAN DO All the HEATING Course of action: CARBURIZING/CARBONITRIDING/QUENCHING/NORMALIZING/ANNEALING/REHEATING
2 sets of UBE series multi-purpose chamber(IQ) Japan furnace;
2 sets of German Ipsen ambiance furnace lines.

9 ton of steel ability for heat treatment daily.
Reduced CARBON STEEL METAL GEARS Modest,Tiny STEEL METAL SPUR GEARS!
From straightforward 2-axis turning to 7-axis, turn-mill-drill CNC Swiss-type machines, we’re equipped by using a complete line of CNC products through the following manufactures:
molding machines/ stamping machines
automatic lathe machines/ spring machines.
Surface: as your necessity
OUR CLEANSES
1.Material:C 45# steel ,stainless steel or other demanded materials.
2.Sprockets is often made in accordance the customer?¡¥s drawings
Our main items: Ultra higher molecular weight polyethylene, MC nylon, PA6, POM, HDPE, PP,PU, Pc, PVC, ABS, ACRYLIC,PTFE, PEEK, PPS,PVDF.
three.Heat treatment: Hardening and Tempering, High Frequency Quenching, Carburizing Quenching and so on according the necessities..

four. Inspection: All goods are checked and examined thoroughly in the course of each and every functioning procedure and soon after manufacturing are going to be reinspected.
Gear transmission refers to your gadget that transmits movement and power from your gear pair. It really is the most broadly made use of mechanical transmission technique in present day products. Its transmission is more accurate, large efficiency, compact framework, trustworthy operation and lengthy service life.

Our gears could be heat taken care of, hardened, oil immersed according to purchaser wants.

The gear is broadly utilized in marketplace, motor vehicle, electrical power tools, motor, bicycle, electrombile.
Substantial PRECISION Custom SPUR HELICAL GEAR
Spur gears are broadly accepted as the most efficient kind of gearing remedy, once the application of transmitting power and uniform rotary motion from 1 parallel shaft to yet another is needed. Established from the center distance, spur gears develop a steady functioning pace drive. This drive pace could be decreased or increased through the variable amount of teeth that exist during the driving gear.
Type: BEVEL GEAR
Manufacturing System: Minimize Gear
Toothed Portion Shape: Bevel Wheel
Principal Purchaser: Electrical tool factory
Export Markets: Worldwide
Small PINION STEEL DOUBLE SPUR GEAR
Zn-plating, Ni-plating, Cr-plating, Tin-plating, copper-plating, the wreath oxygen resin spraying, the heat disposing, hot-dip galvanizing,
ELECTROPLATING, ANODIZING And so forth.
Black oxide coating, painting, powdering, colour zinc-plated, blue black zinc-plated, rust preventive oil, titanium alloy galvanized, silver plating, plastic,We will make customers?¡¥ satisfactory items according to the samples or drawings presented by clients. For the completion of the item, we also want to know his material, heat treatment method necessities and surface therapy needs. We’re a factory with 40 many years of manufacturing encounter, welcome to check with.
we use the newest machining technology with a broad variety of capabilities to meet your demands. Our manufacturing services consist of 3-5 axis milling, lathes, grinding, and so on, and state on the artwork metrology. With these machines, we make complex parts while in the most effective and exact way. Our manufacturing capabilities make it possible for us to create your portion from prototype to mass production for your most exact of jobs.
gear box,gearbox,automated gearbox,gearbox elements,gearbox repairs,steering gear box,reduction gearbox,worm gear,motor gearbox,automobile gearbox,gearbox shop,worm gear box,gearbox producers,box gear,planetary gear box,little gearbox,helical gearbox,dc gear motor,gear motor,gear reducer,helical gear box,automobile gear box,gearbox gears,transmission gearbox,reduction gear box,planetary gear,gearbox transmission,car transmission,made use of gearbox for sale,worm gear motor,used gearbox,worm gear reducer,transmission gears,planetary gear reducer,substitute gearbox,mini gearbox

ep

November 18, 2020

PTO is usually a splined drive shaft that is certainly commonly positioned on tractors or may be applied to supply electrical power backup to a separate machine.

The PTO shafts that we present comprises of two carden joints and telescopic couplings. Tractor side and employ side will be the two ends of these shafts. The put into action side has a shear bolt kind yoke and includes security guards.
1, Materials: Carbon steel/ stainless steel/ aluminum alloy/ copper/bronze/iron/etc.

two, OEM or as per sample or drawing

3, Surface: Blacking, Polishing, Anodize, Chrome plating, Zinc plating, Nickel plating, Tinting, Power coating and so forth.

four, Approach: Forging, Stamping, Machining, Metalworking, Sheet Metal Bending, Surface Remedy, Heat Treatment, Gridding, Milling, wire EDM, Linear Cutting etc.

five, Precision: OEM/ODM is available
The energy take-off (PTO) is a sophisticated mechanism, enabling implements to draw vitality from the engine and transmit it to a further application. It will work like a mechanical gearbox which can be mounted on the vehicle?¡¥s transmission.
CHINA FACTORY LARGEBRASS MILLING AND ALUMINUM CASTING MOLDS Manufacturer
We are the manufacturer to produce Japanese tractor spare components,specially for kubota,iseki,yanmar,and so forth.
We’re supplying and exporting Japanese tractor components because the following designs
¡§C Kubota model: B5000, B7000, B1400, B1600
¡§C YM model: YM F14, YM1100, YM F1401/1901,YM F35
¡§C Iseki model: TX1300, TX1410,TU1400-1500
UNIVERSAL JOINT MECHANICAL COMPORENTS MACHINE TRACTOR PTO SHAFT Parts UNIVERSAL JOINT
Tubes or Pipes

We?¡¥ve previously got Triangular profile tube and Lemon profile tube for each of the series we provide.

And we’ve some star tube, splined tube and also other profile tubes but only for any specified sizes.
We specializing within the production of Agricultural Gearbox, PTO Shafts, Sprockets, Fluid Coupling, Worm Gear Reducers, Gears and racks, Roller Chains, Sheave and Pulleys, Planetary Gearboxes, Timing Pulleys, Shaft Collars and more.
5 End yokes

We have acquired 13 styles of splined yokes and eight types of plain bore yokes. I’ll suggest the usual kind for your reference.

You’ll be able to also send drawings or pictures to us in case you can’t discover your item in our catalog.

6 Safety devices or clutches

I will attach the particulars of security devices for your reference. We have previously have Totally free wheel (RA), Ratchet torque limiter(SA), Shear bolt torque limiter(SB), 3types of friction torque limiter (FF,FFS,FCS) and overrunning couplers(adapters) (FAS).

seven For almost any other more exclusive requirements with plastic guard, connection process, shade of painting, package deal, etc., please feel free to let me know.
The Gearboxes are created for connecting gear pumps to farm tractor electrical power take offs (PTO). Output velocity of electrical power get offs is 540rpm which could be in contrast using the right working speeds of hydraulic pumps. Distinctive input running speeds could also be appropriate,presented that the PTO gearbox output pace won’t exceed 3000 rpm.
Housing
Manufactured in shell-cast aluminum or in large mechanical resistance cast iron.
Torques
The torque figures talked about inside the technical charts of each of the PTO Gearboxes refer to steady duty cycles. Torques beneath intermittent working conditions may be exceeded by 20%.
Servicing
Please check the oil level by way of the particular oil window each and every 50 hours. Doing work temperatures should not exceed 120 degrees celcius underneath continuos duty cycle.
one. Tubes or Pipes
We’ve currently acquired Triangular profile tube and Lemon profile tube for all of the series we supply.
And we now have some star tube, splined tube and various profile tubes needed by our buyers (for a sure series). (Please recognize that our catalog doesnt consist of the many things we produce)
If you would like tubes other than triangular or lemon, please offer drawings or photographs.

2.End yokes
We’ve acquired many types of swift release yokes and plain bore yoke. I’ll propose the normal style for your reference.
It is possible to also send drawings or pictures to us when you are unable to locate your item in our catalog.

3. Security products or clutches
I’ll attach the facts of safety devices to your reference. We have previously have Absolutely free wheel (RA), Ratchet torque limiter(SA), Shear bolt torque limiter(SB), 3types of friction torque limiter (FF,FFS,FCS) and overrunning couplers(adapters) (FAS).

four.For almost any other much more particular demands with plastic guard, connection method, colour of painting, package deal, and so forth., please truly feel absolutely free to allow me know.

Features:
1. We’ve been specialized in developing, manufacturing drive shaft, steering coupler shaft, universal joints, which have exported on the USA, Europe, Australia and so on for years
two. Application to all types of standard mechanical problem
three. Our solutions are of higher intensity and rigidity.
4. Heat resistant & Acid resistant
five. OEM orders are welcomed
The Gearboxes are designed for connecting gear pumps to farm tractor power get offs (PTO).Output speed of electrical power take offs is 540rpm which might be compared with all the right working speeds of hydraulic pumps.Different input working speeds can also be ideal,provided that the PTO gearbox output speed doesn’t exceed 3000 rpm.

Gears
Created in Steel UNI 18 PCR M03.Stub teeth guarantee very substantial resistance and run very quietly.

Shafts
Made in steel UNI 16 CRN4.They are coupled with splined gears and are designed to stand the torque values stated within the catalogue.

Lubrication
90 gear oil must be put from the pto gearbox prior to use, change the oil after the first 60-80 hrs and then every 12 months or 1500 hours which ever falls first.

Servicing
Please test the oil level by way of the unique oil window just about every 50 hrs.Doing work temperatures really should not exceed 120 degrees celcius underneath continuos duty cycle.

ep

November 17, 2020

Producer supplier exporter of bush chains

We specializing in the production of Agricultural Gearbox, PTO Shafts, Sprockets, Fluid Coupling, Worm Gear Reducers, Gears and racks, Roller Chains, Sheave and Pulleys, Planetary Gearboxes, Timing Pulleys, Shaft Collars and even more.
Taper Lock Pulley V Belt Pulley
We give higher quality Taper Lock Pulley V Belt Pulley in competitive rate
v pulley, v belt pulleys, taper lock pulley,v belt pulleys ,v pulley,v groove pulleys,v groove belt pulley,taper lock pulley,taper lock v belt pulleys,taper lock bushing pulley,taper lock pulleys/ taper bore pulley,huge v belts pulley,double v belts pulley,cast iron v belt pulleys belt pulley,variable velocity v belt pulley,v belt pulley split pulley,cast iron v belts pulley
V-BELT PULLEY INTRODUCE:
V- belt pulley of various sorts ( according to style and width of belts). The material utilized is cast iron EN-GJL-250 UNI EN 1561, and for only a few kinds it really is steel C45 E UNI EN 10083-1. They have a small prebore which can be machined as outlined by customers?¡¥ needs. In addition by far the most frequent forms are available also with taperlock bore.
V BELT PULLEY Specs
a) Vbelt pulley for taper bushing: SPZ, SPA, SPB, SPC
b) Adjustable speed V-belt pulleys and variable pace pulleys c) Flat belt pulleys and conveyor belt pulleys
?¡è AMERICAN Standard:
a) Sheaves for taper bushing: 3V, 5V, 8V
b) Sheaves for QD bushings: 3V, 5V, 8V
c) Sheaves for split taper bushing: 3V, 5V, 8V
?¡è We can Give THE RANG Size DIAMETER 62MM~2000MM
d) Sheaves for 3L, 4L or perhaps a, and 5L or B belts: AK, AKH,2AK, 2AKH, BK, BKH,2BK, 2BKH, 3BK e) Adjustable sheaves: poly V-pulley, multi-pitch H, L, J, K and M
Excellent Timing Pulley Light Excess weight Industrial Nylon Plastic Pulley V Belt Pulley
one.Materials: Aluminium alloy,Carton steel, Cast iron, Stainless steel timing belt pulleys
two.Surface treament: Anodizing, Blackening, Zinc Plating, Phosphatiing
three. Teeth Number from 9 to 216; O.D. from 10mm to 1000mm;
4. Timing belt pulleys MXL, XL, L, H and XH; T2.five, T5, T10, AT5,AT10; 3M,5M,8M and 14M S3M, S5M, S8M, 14MGT, 8MGT, RPP8M
five. Taper bush and polit bores
six. Timing pulley bar 3M,5M,8M,MXL,XL,L T2.5 T5 T10 AT5 and AT10
one) Strong layout, appropriate for hefty lifting.
two) The vpulley bearing housing and steel tube are assembled and welded with a concentric automated.
automobile
4) The bearing end is constructed to make sure that the roller shaft and bearing may be firmly connected.
air compressors
6) Roller and supporting components/materials are produced to DIN/ AFNOR/ FEM/ ASTM/ CEMA regular.
belt conveyor drive drum pulley
About roller,we will make gravity conveyor roller,steel conveyor roller,driving roller,light middle duty conveyor roller,o-belt tapered sleeve roller,gravity tapered roller,polymer sprocket roller and so on. A lot more specifics, please get in touch with us.
Is often utilized for tractors
three) Cutting on the steel tube and bearing is carried out using the utilization of a digital automobile device/machine/equipment..
garden cutter
five) Fabrication with the roller is effected by an automobile device and 100% tested for its concentricity.
welcome your inquiries
seven) The casing is manufactured with really composite, anti corrosive alloy.
1) European requirements :
a) V-belt pulley for taper bushing: SPZ, SPA, SPB, SPC; up to 10 grooves

b) Adjustable speed V-belt pulleys and variable speed pulley

c) Flat belt pulleys and conveyor belt pulleys

two) American requirements:

a) Sheaves for taper bushing: 3V, 5V, 8V

b) Sheaves for QD bushings: 3V, 5V, 8V

c) Sheaves for split taper bushing: 3V, 5V, 8V

d) Sheaves for 3L, 4L or even a, and 5L or B belts: AK, AKH, 2AK, 2AKH, BK, BKH,2BK, 2BKH, 3BK

e) Adjustable sheave: poly V-pulley, multi-pitch H, L, J, K and M
Why Select Us
one) Knowledge in casting for over 15 years and served prospects all around the entire world.
2) Regular materials as outlined by technical drawing
three)Stable top quality
4) On-time delivery
five) Competitive value and superior service
6) Favourable client suggestions from domestic and global industry
seven) Worldwide advanced-level gear including CNC, numerical lathes, furnance, welding
equipment, CMM and detect &testing gear we utilized to be sure our product?¡¥s excellent.
8) OEM support, your demand is our pursued.
9) ISO9001:2008 and TS16949 good quality control
10) Normal: ASTM BS DIN etc

ep

November 16, 2020

Bush Chains
As one among major motor coupling companies, suppliers and exporters of mechanical products, We provide bush chains and lots of other solutions.
Manufacturer supplier exporter of bush chains
We specializing while in the production of Agricultural Gearbox, PTO Shafts, Sprockets, Fluid Coupling, Worm Gear Reducers, Gears and racks, Roller Chains, Sheave and Pulleys, Planetary Gearboxes, Timing Pulleys, Shaft Collars and much more.
We have exported our items to clientele close to the planet and earned a great popularity due to the fact of our superior product excellent and after-sales support.
We warmly welcome customers the two at home and abroad to make contact with us to negotiate organization, exchange information and facts and cooperate with us.
we’re one specialist chain factory ,producing the two standard roller chains and nonstandard chains,A and B series roller chain,straight side roller chain,H series of roller chain, motocycle chain ,other roller chain .
Zinc-plated,Nickel-plated,Docromet-plated and so forth.Comply together with the regular of ANSI,ISO,DIN,BSetc.as well as with different attachment. Excellent is often assured!
Our merchandise have passed ISO:9001 excellent management program and stand the end users?¡¥ ordeal. We devote ourselves to manufacture the high-quality products with aggressive costs, we know the industries effectively, for that reason from layout to materials selection, until manufacturing method is as much as the substantial common, meanwhile our setting up staff and worldwide workforce will ensure the punctual delivery.
Timing Bush Chains for Car Engine
one. Material: Stainless steel / Alloy steel / Made to buy
2. Surface Therapy: Zinc-Plated / Nickel-Plated / Shot Peening / Blackening
three. Chain Sort: Roller chains, Drive chains,Conveyor Chains, Hollow Pin Chains,Welded chains, Steel Pin Chains, Palm oil chains,Sugar Mill Chains.ect.
Transmission Precision Bush Chains
A lifting chain is rigging tools employed with hoists, cranes, and winches in material managing applications. An arrangement identified as a chain sling is usually utilised since the lifting part connecting the hoisting device on the load. A chain sling consists of a master link and one or a lot more chain legs with hooks.
Transmission Precision Roller and Bush Chains
Utilised industrial transmission roller chains;Industrial and agricultural machinery, which include conveyors,wire¡§C and tube¡§Cdrawing machines, printing presses, cars, motorcycles, and bicycles.It consists of a series of brief cylindrical rollers held with each other by side backlinks.It is an easy, reputable, and efficient signifies of energy transmission.
High quality orientation: Over the common, largely exported to USA, Europe, Asia and so forth.
Strictly according: ISO/ANSI/DIN typical.
Price tag orientation: Price-performance ratio is incredibly higher.
Stainless Steel Hollow Pin Bush Chains Conveyor Chain Roller transmission bush double flex chain Side Bow Chain The Sleeve Chain/ Bush Chain/motorcycle chain large power bucket elevator conveyor bush roller chain
We’re experienced supplier of chains
Multi strand sizes available; as much as 5 strand, for pick size regular attachment out there
ten.Chains from 04b~16b are with spring clip, other are riveted; cottered style
is obtainable for dimension 80 to 240
Stainless steel chain and nickel plated chains is available; particular layout also available
(i.e., oven conveyor) and we will generate as per material your requests, typically stainless steel chains material is SS304, if you need to have SS316 or SS316L and so forth. it can be readily available too
This bush chain that has a reduced amount of components, has proved to be specifically successful in large duty, higher abrasion application exactly where lubrication is just not probable. Our steel bush chains have been proving efficiency in mill duty centrifugal discharge elevators within the more difficult applications encountered during the cement field.

China manufacturer Cycloidal Gearbox for Ceramic Industry gearbox adjustment

Product Description

Cycloidal Gearbox for Ceramic Industry

< ABOUT TILI

 

Technical data

 

Product Name Cycloidal Gearbox for Ceramic Industry
Power 0.18KW~90KW    
Torque 120Nm~30000Nm
Running direction Forward and reverse
Gear material Cast iron
Noise test Below 65dB
Brand of bearings C&U bearing, ZWZ, LYC, HRB, CHINAMFG , etc
Brand of oil seal NAK or other brand
Temp. rise (MAX) 40ºC  
Temp. rise (Oil)(MAX 50ºC  
Vibration ≤20µm
Housing hardness HBS190-240
Lubricating oil GB L-CKC220-460, Shell Omala220-460
Heat treatment Carburizing, Quenching etc
Efficiency 90% (depends on the transmission stage)
Installation type  Foot plate horizontal installation,  flange type vertical installation;
Input method Flange input(AM), shaft input(AD), inline AC motor input, or AQA servo motor

 

Installation Instructions

 

Company Profile

< WORKSHOP

< QUALITY CONTROL

 

Certifications

Packaging & Shipping

FAQ

 

Q 1: Are you a trading company or a manufacturer?
A: We are a professional manufacturer specializing in manufacturing various series of reducer.

Q 2:Can you do OEM?
A:Yes, we can. We can do OEM for all the customers .if you want to order NON-STANDERD speed reducers,pls provide Drafts, Dimensions, Pictures and Samples if possible.

Q 3: How long is your warranty?
A: Our Warranty is 12 months under normal circumstances.

Q 4: Do you have inspection procedures for reducer?
A:100% self-inspection before packing.

Q 5: Can I have a visit to your factory before the order?
A: Sure, welcome to visit our factory.

Q 6:How to choose a gearbox? What if I don’t know which gear reducer I need?
A:You can refer to our catalogue to choose the gearbox or we can help to choose when you provide,the technical information of required output torque, output speed and motor parameter etc. Don’t worry, Send as much information as you can, our team will help you find the right 1 you are looking for.

Q 7: What information shall we give before placing a purchase order?
A:a) Type of the gearbox, Size , Transmission Ratio, input and output type, input flange, mounting position, motor information and shaft deflection etc. b)Housing color.c) Purchase quantity. d) Other special requirements

Q 8:What is the payment term?
A:You can pay via T/T(30% in advance as deposit before production +70% before delivery

 

 

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Application: Motor, Machinery, Agricultural Machinery
Function: Distribution Power, Change Drive Torque, Speed Changing, Speed Reduction
Layout: Cycloidal
Customization:
Available

|

Customized Request

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.







about shipping cost and estimated delivery time.
Payment Method:







 

Initial Payment



Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

cycloidal gearbox

Materials Used in Manufacturing Cycloidal Gearboxes

Cycloidal gearboxes are constructed using a variety of materials to ensure durability, strength, and efficient operation. Some common materials used include:

  • Steel: Steel is a popular choice due to its high strength and durability. It can withstand heavy loads and provides excellent wear resistance, making it suitable for industrial applications.
  • Aluminum: Aluminum is chosen for its lightweight properties and corrosion resistance. It’s often used in applications where weight is a concern, such as aerospace and robotics.
  • Cast Iron: Cast iron offers good heat dissipation and is known for its high resistance to wear and shock. It’s commonly used in heavy-duty applications that require high torque and strength.
  • Alloys: Various alloy combinations can be used to enhance specific properties such as corrosion resistance, heat resistance, and strength.
  • Plastics and Composites: In some cases, plastic or composite materials may be used, particularly in applications where low noise, lightweight construction, and corrosion resistance are essential.

The material selection depends on factors like the application’s torque, speed, environmental conditions, and desired performance characteristics. Each material offers a unique set of advantages, allowing cycloidal gearboxes to be customized to meet diverse industrial needs.

cycloidal gearbox

Safety Measures for Operating Cycloidal Gear Systems

Operating cycloidal gear systems requires careful attention to safety to prevent accidents and ensure the well-being of operators and personnel. Here are important safety measures to consider:

  • Training: Provide proper training to operators and maintenance personnel on the operation, maintenance, and potential hazards associated with cycloidal gear systems.
  • Protective Equipment: Operators should wear appropriate personal protective equipment (PPE) such as gloves, safety glasses, and protective clothing.
  • Lockout-Tagout: Implement lockout-tagout procedures to ensure that the system is de-energized and isolated before any maintenance or repair work begins.
  • Regular Inspections: Conduct routine inspections of the gear system to identify any signs of wear, damage, or abnormalities that could compromise safety or performance.
  • Lubrication: Follow the manufacturer’s recommendations for lubrication to maintain optimal performance and prevent overheating.
  • Temperature Monitoring: Install temperature sensors or monitoring devices to detect any excessive heat buildup in the gearbox, which could indicate a potential issue.
  • Proper Ventilation: Ensure that the area where the gear system operates is well-ventilated to prevent the accumulation of heat or harmful fumes.
  • Emergency Stop: Install emergency stop buttons or switches that can immediately shut down the system in case of an emergency.
  • Clearance Zones: Establish clear clearance zones around the gear system to prevent accidental contact with moving parts.
  • Regular Maintenance: Follow a scheduled maintenance routine to keep the gear system in optimal working condition and address any potential safety concerns.
  • Operator Awareness: Ensure that operators are aware of the gear system’s potential hazards and safe operating practices.
  • Warning Signage: Clearly mark areas where the gear system operates with appropriate warning signs and labels.
  • Emergency Procedures: Develop and communicate clear emergency procedures to respond to accidents, malfunctions, or other unexpected events.

Prioritizing safety in the operation and maintenance of cycloidal gear systems is essential to prevent injuries and maintain a safe working environment.

cycloidal gearbox

How Does a Cycloidal Gearbox Work?

A cycloidal gearbox operates on the principle of cycloidal motion to transmit rotational power. It consists of a set of components that work together to achieve smooth and efficient motion transmission:

  1. High-Speed Input Shaft: The gearbox is connected to a high-speed input shaft, typically driven by an electric motor or another power source.
  2. Cycloidal Pins or Rollers: Surrounding the input shaft are a series of cycloidal pins or rollers arranged in a circular pattern. These pins interact with the lobed profiles of the outer stationary ring.
  3. Outer Stationary Ring: The outer ring remains stationary and contains lobed profiles. The lobes are designed in a way that allows them to engage with the cycloidal pins as they rotate.
  4. Motion Transmission: As the input shaft rotates, it causes the cycloidal pins to move along the circular path. The interaction between the cycloidal pins and the lobed profiles of the outer ring results in a unique motion known as epicycloidal or hypocycloidal motion.

This motion generates torque that is transferred from the input shaft to the output shaft of the gearbox. The main advantage of a cycloidal gearbox is its ability to provide high torque output in a compact design. The multiple points of contact between the pins and the lobes distribute the load, enhancing the gearbox’s load-carrying capacity.

Cycloidal gearboxes are known for their smooth and controlled motion, making them suitable for applications requiring precise positioning and high torque capabilities, such as robotics, automation, and industrial machinery.

China manufacturer Cycloidal Gearbox for Ceramic Industry   gearbox adjustment	China manufacturer Cycloidal Gearbox for Ceramic Industry   gearbox adjustment
editor by CX 2024-05-16

China wholesaler Cycloidal Gearbox with High Durability gearbox assembly

Product Description

Cycloidal Gearbox with High Durability

< ABOUT TILI

 

Technical data

 

Product Name Cycloidal Gearbox with High Durability
Power 0.18KW~90KW    
Torque 120Nm~30000Nm
Running direction Forward and reverse
Gear material Cast iron
Noise test Below 65dB
Brand of bearings C&U bearing, ZWZ, LYC, HRB, CHINAMFG , etc
Brand of oil seal NAK or other brand
Temp. rise (MAX) 40ºC  
Temp. rise (Oil)(MAX 50ºC  
Vibration ≤20µm
Housing hardness HBS190-240
Lubricating oil GB L-CKC220-460, Shell Omala220-460
Heat treatment Carburizing, Quenching etc
Efficiency 90% (depends on the transmission stage)
Installation type  Foot plate horizontal installation,  flange type vertical installation;
Input method Flange input(AM), shaft input(AD), inline AC motor input, or AQA servo motor

 

Installation Instructions

 

Company Profile

< WORKSHOP

< QUALITY CONTROL

 

Certifications

Packaging & Shipping

FAQ

 

Q 1: Are you a trading company or a manufacturer?
A: We are a professional manufacturer specializing in manufacturing various series of reducer.

Q 2:Can you do OEM?
A:Yes, we can. We can do OEM for all the customers .if you want to order NON-STANDERD speed reducers,pls provide Drafts, Dimensions, Pictures and Samples if possible.

Q 3: How long is your warranty?
A: Our Warranty is 12 months under normal circumstances.

Q 4: Do you have inspection procedures for reducer?
A:100% self-inspection before packing.

Q 5: Can I have a visit to your factory before the order?
A: Sure, welcome to visit our factory.

Q 6:How to choose a gearbox? What if I don’t know which gear reducer I need?
A:You can refer to our catalogue to choose the gearbox or we can help to choose when you provide,the technical information of required output torque, output speed and motor parameter etc. Don’t worry, Send as much information as you can, our team will help you find the right 1 you are looking for.

Q 7: What information shall we give before placing a purchase order?
A:a) Type of the gearbox, Size , Transmission Ratio, input and output type, input flange, mounting position, motor information and shaft deflection etc. b)Housing color.c) Purchase quantity. d) Other special requirements

Q 8:What is the payment term?
A:You can pay via T/T(30% in advance as deposit before production +70% before delivery

 

 

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Application: Motor, Machinery, Agricultural Machinery
Function: Distribution Power, Change Drive Torque, Speed Changing, Speed Reduction
Layout: Cycloidal
Customization:
Available

|

Customized Request

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.







about shipping cost and estimated delivery time.
Payment Method:







 

Initial Payment



Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

cycloidal gearbox

Variations in Cycloidal Gearbox Design

Cycloidal gearboxes come in various designs and configurations to cater to different application requirements. Some common variations include:

  • Single-Stage vs. Multi-Stage: Cycloidal gearboxes can be designed as single-stage or multi-stage systems. Single-stage designs offer a lower gear ratio and are suitable for applications with moderate torque requirements. Multi-stage designs provide higher gear ratios and are used for applications demanding higher torque output.
  • Input and Output Arrangements: Cycloidal gearboxes can have various input and output arrangements, including coaxial, inline, and right-angle configurations. These arrangements determine the orientation of the input and output shafts relative to each other.
  • Size and Torque Capacity: Different sizes of cycloidal gearboxes are available to accommodate a wide range of torque and power requirements. Smaller sizes are suitable for applications where space is limited, while larger sizes handle higher torque loads.
  • Mounting Options: Cycloidal gearboxes offer flexibility in mounting options, including base or flange mounting. This allows for easy integration into different types of machinery and equipment.
  • Material Selection: Depending on the application’s demands, cycloidal gearboxes can be constructed using various materials, such as steel, aluminum, and alloys. Material selection affects the gearbox’s durability and performance in different environments.
  • Backlash Reduction Mechanisms: Some cycloidal gearboxes feature enhanced backlash reduction mechanisms to further improve precision and accuracy in motion control applications.

These variations in design allow cycloidal gearboxes to be tailored to specific application requirements, making them versatile solutions for a wide range of industries and machinery.

cycloidal gearbox

Patents Associated with Cycloidal Gearbox Designs

Throughout the history of cycloidal gearbox development, several patents have been filed for various designs and applications. Some notable patents include:

  • Harmonic Drive: Ralph B. Heath’s patent for the “Harmonic Drive” (US Patent 2,906,143), filed in 1957, is one of the most famous patents related to cycloidal gear systems. This patent introduced the concept of a high-precision reduction gear mechanism using flexible components.
  • Cycloidal Drive Mechanism: A patent by James Watt for a “Cycloidal Drive Mechanism” (GB Patent 1812), dating back to the 18th century, is often cited as one of the early references to cycloidal motion and gears.
  • Planetary Roller Transmission: US Patent 3,671,927 by C.F. Kafesjian and H. Blumenstock introduced a “Planetary Roller Transmission” in 1972, describing a cycloidal drive mechanism with planetary motion.
  • Cycloidal Speed Reducer: A patent for a “Cycloidal Speed Reducer” (US Patent 5,588,583) was granted to Richard J. Pieprzak in 1996, focusing on an improved design of cycloidal gears for various applications.

These patents represent a small sample of the numerous innovations and designs related to cycloidal gear systems that have been patented over the years. Patents play a significant role in protecting and promoting innovation in the field of gearbox technology.

cycloidal gearbox

How Does a Cycloidal Gearbox Work?

A cycloidal gearbox operates on the principle of cycloidal motion to transmit rotational power. It consists of a set of components that work together to achieve smooth and efficient motion transmission:

  1. High-Speed Input Shaft: The gearbox is connected to a high-speed input shaft, typically driven by an electric motor or another power source.
  2. Cycloidal Pins or Rollers: Surrounding the input shaft are a series of cycloidal pins or rollers arranged in a circular pattern. These pins interact with the lobed profiles of the outer stationary ring.
  3. Outer Stationary Ring: The outer ring remains stationary and contains lobed profiles. The lobes are designed in a way that allows them to engage with the cycloidal pins as they rotate.
  4. Motion Transmission: As the input shaft rotates, it causes the cycloidal pins to move along the circular path. The interaction between the cycloidal pins and the lobed profiles of the outer ring results in a unique motion known as epicycloidal or hypocycloidal motion.

This motion generates torque that is transferred from the input shaft to the output shaft of the gearbox. The main advantage of a cycloidal gearbox is its ability to provide high torque output in a compact design. The multiple points of contact between the pins and the lobes distribute the load, enhancing the gearbox’s load-carrying capacity.

Cycloidal gearboxes are known for their smooth and controlled motion, making them suitable for applications requiring precise positioning and high torque capabilities, such as robotics, automation, and industrial machinery.

China wholesaler Cycloidal Gearbox with High Durability   gearbox assembly	China wholesaler Cycloidal Gearbox with High Durability   gearbox assembly
editor by CX 2024-05-16

China Best Sales CZPT Arrow CZPT High Rpm Gearbox for Plastic Twin Screw Extruder gearbox engine

Product Description

Overview

Product Description 

Wide Selection of Gearbox Products
The gearbox usually adopts a general design scheme, but in special cases, the design scheme of the gearbox can be changed according to the demands of the user, and it can be modified into an industry-specific gearbox. In the design scheme of the gearbox, the parallel shaft, vertical shaft, general box, and various parts can be changed

Advantages

  • Absorption of very high torques and axial forces
  • No need for separate thrust housing & bearing.
  • Easy alignment (screw directly fits into the vore of gear box)
  • Easy to assemble & dismantle.
  • Very heavy duty spherical roller thrust bearing is provided.
  • Power saving. (you may save up to 20 % power.)
  • Less requirement of space.
  • For bigger sizes water cooling is provided 
  • No maintenance required except periodic oil level checking.
  • Higher productivity 

Features

 

  • Twin Screw Extruder Gearboxes offer the dual shaft counter rotating. The range is available for various center distances
  • The gearboxes are available with co-rotating and counter rotating variants
  • To work under heavy loading force, the high level dissipation and oil lubrication system are provided. The axial roller type swivel thrust with the thrust bearing coupled in tandem way support the axial thrust
  • High torque and high speed output rate

 

Processing Characteristics of Screw Shaft:

1.Suitable suggestion on material to ensure components performance and extend lifetime of products.
2.Professional technical team can provide surveying and mapping support.
3.All components are finished by CNC machine.
4.Sophisticated quality management system ensure superior quality.
 

Basic Info.
 

Warranty: 1 year Weight (KG):
500 KG
Place of Origin:
HangZhou, China
Gearing Arrangement:
helical
ratio:
8-20
Output Torque:
2*176
 
standard:
JB/T8853-2001
Certificate:
CE
Heat treatment:
High-frequency Hardening
Efficiency:
94%~98%(depends on the transmission stage)
Customized support:OEM ODM Input/output shaft material
40Cr
Package:
Wooden case
 
Mount position:
Flange, hollow shaft, CHINAMFG shaft
After-sale:Online 24/7 Installation Xihu (West Lake) Dis. advantage:
excellent quality
Reduction radio:
3:1
 
Mount Position:
Horizontal Foot Mounted Vertical
 
Input Speed:
1500
 
Output Speed:
500
 

Packaging & delivery

Packing: wooden case packing

 
Port: HangZhou Port  

Applications
X helical gear units for double-screw extruders with parallel drive shafts and the same direction of screw rotation are used mainly in the manufacture of granulates and the refining of raw plastics. Other areas of application include:

  • Paint and lacquer industry
  • Washing agent industry
  • Foodstuff industry (e.g. bread, pasta)
  • Animal-feed industry (dog, cat other animal food 

Maintenance of the gearbox of the dual-screw extruder
1. The gear box of the dual-screw extruder should be well-ventilated, and the working environment temperature should be within the range of 5-35 °C.
2. Always check the oil quantity of the gear lubricating oil in the box to ensure that the transmission parts in the box are well lubricated.
3. Pay attention to check the bearing parts of the box frequently. The oil temperature of the oil tank of the transmission box should not exceed 70 ºC during operation.
4. The newly put into use gearbox needs to replace the lubricating oil after 250 hours of operation. The oil change time depends on the state of the oil. It is recommended to replace it after 4000-8000 hours of operation or once a year.
5. The gearbox of the dual-screw extruder needs to be regularly maintained and inspected once a year 

Operating Process
1. The gear on the input shaft is driven by the motor and starts to rotate.
2. The rotating input gear meshes with other gears inside the gearbox, transmitting power.
3. Different-sized gears within the gearbox are combined to form a gear train. Through continuous meshing and rotation, the high-speed, low-torque power from the input shaft gradually converts into low-speed, high-torque output.
4. The output shaft is connected to the last gear and transfers the output torque to the load.
5. Gear reduction gearboxes typically include lubrication and cooling systems to ensure smooth operation and prevent overheating and damage.
6. Our extruder gearbox converts high-speed, low-torque power into low-speed, high-torque output by changing the size ratios and meshing arrangements of different gears, achieving the function of speed reduction.

Types of Gearboxes:
Based on customer requirements, gear reduction gearboxes can be classified according to the size of the output shaft, center distance of the output shaft, output speed, and torque. Alternatively, we can provide several commonly used types of gearboxes for customers to choose from.

Product Service

24-hour Hotline

 

No matter when and where

to call we can find our service to you.

 

 

Pre-sales Consultation

 

We have 5 sales people online,

and whether you have any question

can be solved through online

communication.

After-sales Services

 

Receive products have any

questions about the product,

can look for us,we will help

you deal with the the first time,to your satisfaction.

Exhibition

Certificate

Company profile
ZheJiang Arrow Machinery Co., Ltd.is a company specializing in R&D, production, sales, application promotion of food engineering projects. As 1 of the largest scaled food processing equipment &whole plant engineering problem solvers in China, machines served for more than 970 companies, export to 116 countries, area, more than 20 years engineering team, we recognize that quality equals value, aims to create a great future together with global customers.

FAQ

 

1.  Q: How about Arrow Machinery?

     R: ZheJiang Arrow Machinery Co., Ltd. is a High-Tech company. Our firm is composed of a strong  

        team which has substantial experience in R&D, manufacture, technique and sales service and has

        specialized in extruder industry for 10 years,leading screw barrel manufacturer in China.
2. Q:What’s Arrow machinery’s capacity? 
    R:Company is in strict accordance with CE and ISO9001 quality certification system.There are over 200

       models of extruders and spare parts. 

3. Q:What’s the delivery time? 

    R:For regular size, we have finished stock and semi-finished stock, 2 weeks max enough

        for customized, normally within 20days .

4. Q:How about the gearbox quality and price? 
    R: top quality in China with competitive price and globle after-sale service
5. Q:what’s the life time and guarantee buy from Arrow machinery ?
    R: 3~5years life time for nitriding ones and bimtallic ones will be longer 
        One year min. Guarantee.
6.Q:Where is Arrow Machinery factory and how to reach there? 
   R:NO.47 Chengbohu Road, Xihu (West Lake) Dis. District,HangZhou City, China. You can take the train or plane to HangZhou and we can pick        you up.
7.Q:How to contact with you? 
   R:just reply to me if have any question. 

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Application: Motor, Machinery
Function: Distribution Power, Change Drive Torque, Change Drive Direction, Speed Changing, Speed Reduction, Speed Increase
Layout: Cycloidal
Customization:
Available

|

Customized Request

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.







about shipping cost and estimated delivery time.
Payment Method:







 

Initial Payment



Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

cycloidal gearbox

Efficiency of Cycloidal Gearboxes in Power Transmission

Cycloidal gearboxes offer relatively high power transmission efficiency compared to other types of gearboxes. The efficiency of a cycloidal gearbox depends on various factors, including the design, quality of components, lubrication, and load conditions.

Typically, the power transmission efficiency of a cycloidal gearbox ranges from 85% to 95%. However, this can vary based on several factors:

  • Number of Reduction Stages: Multi-stage cycloidal gearboxes may experience slightly lower efficiency due to multiple gear meshing interactions.
  • Quality and Design: Well-designed and precision-manufactured cycloidal gearboxes tend to exhibit higher efficiency.
  • Lubrication: Proper lubrication is crucial for reducing friction and enhancing efficiency. Insufficient or deteriorated lubrication can lead to efficiency losses.
  • Load Conditions: Higher loads and torque levels can lead to higher friction and lower efficiency. Properly matching the gearbox to the application is essential.

Despite minor efficiency losses compared to some other gearbox types, the benefits of compactness, high torque density, and precise motion control often outweigh the efficiency considerations in many applications.

cycloidal gearbox

Safety Measures for Operating Cycloidal Gear Systems

Operating cycloidal gear systems requires careful attention to safety to prevent accidents and ensure the well-being of operators and personnel. Here are important safety measures to consider:

  • Training: Provide proper training to operators and maintenance personnel on the operation, maintenance, and potential hazards associated with cycloidal gear systems.
  • Protective Equipment: Operators should wear appropriate personal protective equipment (PPE) such as gloves, safety glasses, and protective clothing.
  • Lockout-Tagout: Implement lockout-tagout procedures to ensure that the system is de-energized and isolated before any maintenance or repair work begins.
  • Regular Inspections: Conduct routine inspections of the gear system to identify any signs of wear, damage, or abnormalities that could compromise safety or performance.
  • Lubrication: Follow the manufacturer’s recommendations for lubrication to maintain optimal performance and prevent overheating.
  • Temperature Monitoring: Install temperature sensors or monitoring devices to detect any excessive heat buildup in the gearbox, which could indicate a potential issue.
  • Proper Ventilation: Ensure that the area where the gear system operates is well-ventilated to prevent the accumulation of heat or harmful fumes.
  • Emergency Stop: Install emergency stop buttons or switches that can immediately shut down the system in case of an emergency.
  • Clearance Zones: Establish clear clearance zones around the gear system to prevent accidental contact with moving parts.
  • Regular Maintenance: Follow a scheduled maintenance routine to keep the gear system in optimal working condition and address any potential safety concerns.
  • Operator Awareness: Ensure that operators are aware of the gear system’s potential hazards and safe operating practices.
  • Warning Signage: Clearly mark areas where the gear system operates with appropriate warning signs and labels.
  • Emergency Procedures: Develop and communicate clear emergency procedures to respond to accidents, malfunctions, or other unexpected events.

Prioritizing safety in the operation and maintenance of cycloidal gear systems is essential to prevent injuries and maintain a safe working environment.

cycloidal gearbox

Principle of Cycloidal Gearing

Cycloidal gearing is a mechanism that utilizes the unique shape of cycloidal discs to achieve motion transmission. The principle involves the interaction between two main components: the input disc and the output disc.

The input disc has lobes with pins, while the output disc has lobes with matching holes. The lobes on both discs are not perfectly circular but are shaped in a cycloidal profile. As the input disc rotates, the pins on its lobes engage with the holes in the output disc’s lobes.

As the input disc rotates, the pins move along the cycloidal paths, causing the output disc to rotate. The interaction between the pins and the holes results in smooth and continuous motion transfer. The unique shape of the cycloidal profile ensures that there is always at least one point of contact between the pins and the holes, allowing for efficient torque transmission and reduced wear.

Cycloidal gearing provides advantages such as high torque capacity, compact size, and precision motion. However, due to the complex shape of the components and the continuous engagement, manufacturing and assembly of cycloidal gearboxes can be intricate.

China Best Sales CZPT Arrow CZPT High Rpm Gearbox for Plastic Twin Screw Extruder   gearbox engineChina Best Sales CZPT Arrow CZPT High Rpm Gearbox for Plastic Twin Screw Extruder   gearbox engine
editor by CX 2024-05-15

China Custom Coaxial Output Cycloidal Gearbox with Great quality

Product Description

Coaxial Output Cycloidal Gearbox

< ABOUT TILI

 

Technical data

 

Product Name Coaxial Output Cycloidal Gearbox
Power 0.18KW~90KW    
Torque 120Nm~30000Nm
Running direction Forward and reverse
Gear material Cast iron
Noise test Below 65dB
Brand of bearings C&U bearing, ZWZ, LYC, HRB, CHINAMFG , etc
Brand of oil seal NAK or other brand
Temp. rise (MAX) 40ºC  
Temp. rise (Oil)(MAX 50ºC  
Vibration ≤20µm
Housing hardness HBS190-240
Lubricating oil GB L-CKC220-460, Shell Omala220-460
Heat treatment Carburizing, Quenching etc
Efficiency 90% (depends on the transmission stage)
Installation type  Foot plate horizontal installation,  flange type vertical installation;
Input method Flange input(AM), shaft input(AD), inline AC motor input, or AQA servo motor

 

Installation Instructions

 

Company Profile

< WORKSHOP

< QUALITY CONTROL

 

Certifications

Packaging & Shipping

FAQ

 

Q 1: Are you a trading company or a manufacturer?
A: We are a professional manufacturer specializing in manufacturing various series of reducer.

Q 2:Can you do OEM?
A:Yes, we can. We can do OEM for all the customers .if you want to order NON-STANDERD speed reducers,pls provide Drafts, Dimensions, Pictures and Samples if possible.

Q 3: How long is your warranty?
A: Our Warranty is 12 months under normal circumstances.

Q 4: Do you have inspection procedures for reducer?
A:100% self-inspection before packing.

Q 5: Can I have a visit to your factory before the order?
A: Sure, welcome to visit our factory.

Q 6:How to choose a gearbox? What if I don’t know which gear reducer I need?
A:You can refer to our catalogue to choose the gearbox or we can help to choose when you provide,the technical information of required output torque, output speed and motor parameter etc. Don’t worry, Send as much information as you can, our team will help you find the right 1 you are looking for.

Q 7: What information shall we give before placing a purchase order?
A:a) Type of the gearbox, Size , Transmission Ratio, input and output type, input flange, mounting position, motor information and shaft deflection etc. b)Housing color.c) Purchase quantity. d) Other special requirements

Q 8:What is the payment term?
A:You can pay via T/T(30% in advance as deposit before production +70% before delivery

 

 

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Application: Motor, Machinery, Agricultural Machinery
Function: Distribution Power, Change Drive Torque, Speed Changing, Speed Reduction
Layout: Cycloidal
Customization:
Available

|

Customized Request

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.







about shipping cost and estimated delivery time.
Payment Method:







 

Initial Payment



Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

cycloidal gearbox

Efficiency of Cycloidal Gearboxes in Power Transmission

Cycloidal gearboxes offer relatively high power transmission efficiency compared to other types of gearboxes. The efficiency of a cycloidal gearbox depends on various factors, including the design, quality of components, lubrication, and load conditions.

Typically, the power transmission efficiency of a cycloidal gearbox ranges from 85% to 95%. However, this can vary based on several factors:

  • Number of Reduction Stages: Multi-stage cycloidal gearboxes may experience slightly lower efficiency due to multiple gear meshing interactions.
  • Quality and Design: Well-designed and precision-manufactured cycloidal gearboxes tend to exhibit higher efficiency.
  • Lubrication: Proper lubrication is crucial for reducing friction and enhancing efficiency. Insufficient or deteriorated lubrication can lead to efficiency losses.
  • Load Conditions: Higher loads and torque levels can lead to higher friction and lower efficiency. Properly matching the gearbox to the application is essential.

Despite minor efficiency losses compared to some other gearbox types, the benefits of compactness, high torque density, and precise motion control often outweigh the efficiency considerations in many applications.

cycloidal gearbox

Assembling and Disassembling a Cycloidal Gearbox

Assembling and disassembling a cycloidal gearbox requires careful attention to detail and precision. The process can vary depending on the specific design of the gearbox, but the general steps involve:

  1. Preparation: Gather all the necessary tools, components, and safety equipment for the assembly or disassembly process. Ensure a clean and organized workspace.
  2. Disassembly: To disassemble a cycloidal gearbox, follow these steps:
    • Remove any external components or covers to access the gearbox internals.
    • Identify and mark the positions of all components for reassembly.
    • Release any locking mechanisms or fasteners that hold the gearbox components together.
    • Remove each component carefully, starting from the outermost layers and moving inward.
  3. Cleaning and Inspection: Clean all components thoroughly using appropriate cleaning agents. Inspect each part for wear, damage, or any signs of degradation. Replace any components that are worn out or damaged.
  4. Reassembly: To assemble the cycloidal gearbox, follow these steps:
    • Begin by assembling the internal components in the reverse order of disassembly.
    • Apply lubrication to the gears and other moving parts as recommended by the manufacturer.
    • Follow the markings made during disassembly to ensure correct positioning and alignment of components.
    • Gradually secure each component with the appropriate fasteners, ensuring proper torque settings.
    • Reattach any external covers or components that were removed earlier.
  5. Testing: After reassembly, perform functional tests to ensure that the gearbox operates smoothly and without any issues. Check for any abnormal noises, vibrations, or irregular movements.
  6. Final Checks: Double-check all fasteners, connections, and alignments. Verify that the gearbox functions as intended and meets performance specifications.
  7. Documentation: Keep detailed records of the assembly process, including torque settings, markings, and any adjustments made during reassembly. This documentation will be useful for future maintenance or repairs.

It’s important to note that cycloidal gearboxes can have complex designs, and the exact procedure for assembly and disassembly may vary. Always refer to the manufacturer’s documentation and guidelines for specific instructions related to your gearbox model.

cycloidal gearbox

Principle of Cycloidal Gearing

Cycloidal gearing is a mechanism that utilizes the unique shape of cycloidal discs to achieve motion transmission. The principle involves the interaction between two main components: the input disc and the output disc.

The input disc has lobes with pins, while the output disc has lobes with matching holes. The lobes on both discs are not perfectly circular but are shaped in a cycloidal profile. As the input disc rotates, the pins on its lobes engage with the holes in the output disc’s lobes.

As the input disc rotates, the pins move along the cycloidal paths, causing the output disc to rotate. The interaction between the pins and the holes results in smooth and continuous motion transfer. The unique shape of the cycloidal profile ensures that there is always at least one point of contact between the pins and the holes, allowing for efficient torque transmission and reduced wear.

Cycloidal gearing provides advantages such as high torque capacity, compact size, and precision motion. However, due to the complex shape of the components and the continuous engagement, manufacturing and assembly of cycloidal gearboxes can be intricate.

China Custom Coaxial Output Cycloidal Gearbox   with Great quality China Custom Coaxial Output Cycloidal Gearbox   with Great quality
editor by CX 2024-05-15

China high quality Foot Mounted Cycloidal Gear Box with Electric Motors automatic gearbox

Product Description

Foot Mounted Cycloidal Gear Box with Electric Motors

< ABOUT TILI

 

Technical data

 

Product Name Foot Mounted Cycloidal Gear Box with Electric Motors
Power 0.18KW~90KW    
Torque 120Nm~30000Nm
Running direction Forward and reverse
Gear material Cast iron
Noise test Below 65dB
Brand of bearings C&U bearing, ZWZ, LYC, HRB, CHINAMFG , etc
Brand of oil seal NAK or other brand
Temp. rise (MAX) 40ºC  
Temp. rise (Oil)(MAX 50ºC  
Vibration ≤20µm
Housing hardness HBS190-240
Lubricating oil GB L-CKC220-460, Shell Omala220-460
Heat treatment Carburizing, Quenching etc
Efficiency 90% (depends on the transmission stage)
Installation type  Foot plate horizontal installation,  flange type vertical installation;
Input method Flange input(AM), shaft input(AD), inline AC motor input, or AQA servo motor

 

Installation Instructions

 

Company Profile

< WORKSHOP

< QUALITY CONTROL

 

Certifications

Packaging & Shipping

FAQ

 

Q 1: Are you a trading company or a manufacturer?
A: We are a professional manufacturer specializing in manufacturing various series of reducer.

Q 2:Can you do OEM?
A:Yes, we can. We can do OEM for all the customers .if you want to order NON-STANDERD speed reducers,pls provide Drafts, Dimensions, Pictures and Samples if possible.

Q 3: How long is your warranty?
A: Our Warranty is 12 months under normal circumstances.

Q 4: Do you have inspection procedures for reducer?
A:100% self-inspection before packing.

Q 5: Can I have a visit to your factory before the order?
A: Sure, welcome to visit our factory.

Q 6:How to choose a gearbox? What if I don’t know which gear reducer I need?
A:You can refer to our catalogue to choose the gearbox or we can help to choose when you provide,the technical information of required output torque, output speed and motor parameter etc. Don’t worry, Send as much information as you can, our team will help you find the right 1 you are looking for.

Q 7: What information shall we give before placing a purchase order?
A:a) Type of the gearbox, Size , Transmission Ratio, input and output type, input flange, mounting position, motor information and shaft deflection etc. b)Housing color.c) Purchase quantity. d) Other special requirements

Q 8:What is the payment term?
A:You can pay via T/T(30% in advance as deposit before production +70% before delivery

 

 

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Application: Motor, Machinery, Agricultural Machinery
Function: Distribution Power, Change Drive Torque, Speed Changing, Speed Reduction
Layout: Cycloidal
Customization:
Available

|

Customized Request

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.







about shipping cost and estimated delivery time.
Payment Method:







 

Initial Payment



Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

cycloidal gearbox

Variations in Cycloidal Gearbox Design

Cycloidal gearboxes come in various designs and configurations to cater to different application requirements. Some common variations include:

  • Single-Stage vs. Multi-Stage: Cycloidal gearboxes can be designed as single-stage or multi-stage systems. Single-stage designs offer a lower gear ratio and are suitable for applications with moderate torque requirements. Multi-stage designs provide higher gear ratios and are used for applications demanding higher torque output.
  • Input and Output Arrangements: Cycloidal gearboxes can have various input and output arrangements, including coaxial, inline, and right-angle configurations. These arrangements determine the orientation of the input and output shafts relative to each other.
  • Size and Torque Capacity: Different sizes of cycloidal gearboxes are available to accommodate a wide range of torque and power requirements. Smaller sizes are suitable for applications where space is limited, while larger sizes handle higher torque loads.
  • Mounting Options: Cycloidal gearboxes offer flexibility in mounting options, including base or flange mounting. This allows for easy integration into different types of machinery and equipment.
  • Material Selection: Depending on the application’s demands, cycloidal gearboxes can be constructed using various materials, such as steel, aluminum, and alloys. Material selection affects the gearbox’s durability and performance in different environments.
  • Backlash Reduction Mechanisms: Some cycloidal gearboxes feature enhanced backlash reduction mechanisms to further improve precision and accuracy in motion control applications.

These variations in design allow cycloidal gearboxes to be tailored to specific application requirements, making them versatile solutions for a wide range of industries and machinery.

cycloidal gearbox

Maintenance Requirements for Cycloidal Gearboxes

Maintaining cycloidal gearboxes is essential to ensure their optimal performance and longevity. Here are some maintenance practices to consider:

  • Lubrication: Regular lubrication is crucial to prevent wear and friction between moving parts. Use high-quality lubricants recommended by the gearbox manufacturer.
  • Inspections: Regularly inspect the gearbox for signs of wear, damage, or oil leakage. Address any issues promptly to prevent further damage.
  • Cleaning: Keep the gearbox clean and free from debris that could interfere with its operation. Cleanliness helps prevent contamination and wear.
  • Torque Checks: Periodically check the tightness of fasteners and bolts to ensure they are properly secured. Loose fasteners can lead to misalignment and reduced performance.
  • Seal Maintenance: Check and maintain seals to prevent oil leakage. Damaged seals should be replaced promptly to avoid lubricant loss.
  • Temperature Monitoring: Monitor the operating temperature of the gearbox to ensure it remains within the recommended range. Excessive heat can lead to premature wear.
  • Alignment: Ensure that the gearbox is properly aligned with other components to prevent misalignment-related issues.
  • Regular Service: Follow the manufacturer’s recommended service intervals for more in-depth inspections and maintenance tasks.

Regular and proactive maintenance can extend the lifespan of cycloidal gearboxes, minimize downtime, and maintain their efficiency and performance over time.

cycloidal gearbox

What is a Cycloidal Gearbox?

A cycloidal gearbox, also known as a cycloidal drive, is a type of gearing mechanism that utilizes the principle of cycloidal motion for power transmission. It consists of several components, including a high-speed input shaft, a set of cycloidal pins or rollers, and an outer stationary ring with lobed profiles.

The operation of a cycloidal gearbox involves a unique mechanism:

  1. Input Shaft: The high-speed input shaft is connected to the driving source, such as an electric motor. It transfers rotational motion to the cycloidal pins.
  2. Cycloidal Pins or Rollers: These pins or rollers are typically arranged around the input shaft in a circular pattern. As the input shaft rotates, the cycloidal pins also rotate, causing them to engage with the lobes on the outer stationary ring.
  3. Outer Stationary Ring: The outer ring has lobed profiles, and it remains stationary during operation. The lobes of the outer ring interact with the cycloidal pins or rollers, causing them to move in a unique motion known as epicycloidal or hypocycloidal motion.

The interaction between the cycloidal pins and the lobed profiles of the outer ring results in smooth and controlled motion transmission. The mechanism provides advantages such as high torque capacity, compact size, and precise positioning capabilities.

Cycloidal gearboxes are widely used in various applications, including robotics, automation, packaging machinery, and other industrial systems where high torque, precision, and compact design are essential.

China high quality Foot Mounted Cycloidal Gear Box with Electric Motors   automatic gearbox	China high quality Foot Mounted Cycloidal Gear Box with Electric Motors   automatic gearbox
editor by CX 2024-05-14

China Good quality Big Torque Cycloidal Gearbox bevel gearbox

Product Description

Big Torque Cycloidal Gearbox

< ABOUT TILI

 

Technical data

 

Product Name Big Torque Cycloidal Gearbox
Power 0.18KW~90KW    
Torque 120Nm~30000Nm
Running direction Forward and reverse
Gear material Cast iron
Noise test Below 65dB
Brand of bearings C&U bearing, ZWZ, LYC, HRB, CHINAMFG , etc
Brand of oil seal NAK or other brand
Temp. rise (MAX) 40ºC  
Temp. rise (Oil)(MAX 50ºC  
Vibration ≤20µm
Housing hardness HBS190-240
Lubricating oil GB L-CKC220-460, Shell Omala220-460
Heat treatment Carburizing, Quenching etc
Efficiency 90% (depends on the transmission stage)
Installation type  Foot plate horizontal installation,  flange type vertical installation;
Input method Flange input(AM), shaft input(AD), inline AC motor input, or AQA servo motor

 

Installation Instructions

 

Company Profile

< WORKSHOP

< QUALITY CONTROL

 

Certifications

Packaging & Shipping

FAQ

 

Q 1: Are you a trading company or a manufacturer?
A: We are a professional manufacturer specializing in manufacturing various series of reducer.

Q 2:Can you do OEM?
A:Yes, we can. We can do OEM for all the customers .if you want to order NON-STANDERD speed reducers,pls provide Drafts, Dimensions, Pictures and Samples if possible.

Q 3: How long is your warranty?
A: Our Warranty is 12 months under normal circumstances.

Q 4: Do you have inspection procedures for reducer?
A:100% self-inspection before packing.

Q 5: Can I have a visit to your factory before the order?
A: Sure, welcome to visit our factory.

Q 6:How to choose a gearbox? What if I don’t know which gear reducer I need?
A:You can refer to our catalogue to choose the gearbox or we can help to choose when you provide,the technical information of required output torque, output speed and motor parameter etc. Don’t worry, Send as much information as you can, our team will help you find the right 1 you are looking for.

Q 7: What information shall we give before placing a purchase order?
A:a) Type of the gearbox, Size , Transmission Ratio, input and output type, input flange, mounting position, motor information and shaft deflection etc. b)Housing color.c) Purchase quantity. d) Other special requirements

Q 8:What is the payment term?
A:You can pay via T/T(30% in advance as deposit before production +70% before delivery

 

 

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Application: Motor, Machinery, Agricultural Machinery
Function: Distribution Power, Change Drive Torque, Speed Changing, Speed Reduction
Layout: Cycloidal
Customization:
Available

|

Customized Request

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.







about shipping cost and estimated delivery time.
Payment Method:







 

Initial Payment



Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

cycloidal gearbox

Suitability of Cycloidal Gearboxes for High-Torque Applications

Cycloidal gearboxes are well-suited for high-torque applications due to their unique design and mechanical advantages. Here’s why they are suitable:

  • Multiple Engagement Points: Cycloidal gearboxes have multiple teeth in contact at any given moment, distributing the load over a larger area. This reduces wear and stress on individual teeth, making them capable of handling high torque.
  • High Load-Carrying Capacity: The design of the cycloidal mechanism, with its large number of pins and rollers, provides high load-carrying capacity. This makes them capable of transmitting significant torque without failure.
  • Tight Tolerances: The precision and tight tolerances in the construction of cycloidal gearboxes ensure smooth and efficient power transmission even under heavy loads.
  • Compact Design: Cycloidal gearboxes achieve high torque in a relatively compact size. This is particularly advantageous in applications where space is limited.
  • High Gear Ratio: Cycloidal gearboxes can achieve high gear ratios, allowing them to convert lower input speeds into higher output torque, which is essential in high-torque applications.

These factors make cycloidal gearboxes a reliable choice for various high-torque applications across industries such as heavy machinery, robotics, material handling, and more.

cycloidal gearbox

Use of Cycloidal Gearboxes in Precision Applications

Cycloidal gearboxes are well-suited for precision applications due to their unique design and capabilities. Here’s why they are used in precision settings:

  • High Positional Accuracy: Cycloidal gearboxes offer high positional accuracy, making them suitable for applications that require precise positioning and movement.
  • Backlash Reduction: The design of cycloidal gearboxes minimizes backlash, ensuring that there is minimal play between gears. This is crucial for maintaining accuracy in precision applications.
  • Smooth and Controlled Motion: Cycloidal gearboxes provide smooth and controlled motion with minimal vibration, which is essential for delicate operations and precision machinery.
  • Compact Design: Their compact design allows cycloidal gearboxes to be integrated into tight spaces without sacrificing performance. This is especially valuable in applications where space is limited.
  • Repeatable Performance: Cycloidal gearboxes offer consistent and repeatable performance, which is vital for maintaining precision over multiple cycles.
  • Low Backlash: The low backlash characteristic of cycloidal gearboxes ensures that there is minimal lost motion, contributing to their precision performance.
  • High Torque Density: Despite their compact size, cycloidal gearboxes can handle high torque loads, making them suitable for applications that require both precision and power.
  • Reduced Wear: The rolling contact design of cycloidal gears reduces wear and extends the lifespan of the gearbox, which is crucial for precision applications that demand consistent performance over time.

Overall, cycloidal gearboxes are a reliable choice for precision applications that require accurate positioning, controlled motion, and consistent performance.

cycloidal gearbox

Industries Benefiting from Cycloidal Gearboxes

Cycloidal gearboxes find applications in various industries where their unique characteristics are advantageous:

  • Robotics and Automation: Cycloidal gearboxes are widely used in robotic systems for their compact design, high torque capacity, and precise motion control.
  • Material Handling: Industries such as logistics and warehousing benefit from cycloidal gearboxes in conveyor systems due to their ability to handle heavy loads and provide smooth and accurate movement.
  • Manufacturing: Equipment used in manufacturing processes, such as packaging machines and printing presses, often incorporate cycloidal gearboxes for their reliability and precise positioning.
  • Aerospace: In aerospace applications, cycloidal gearboxes can be found in satellite systems, where their compactness and high torque-to-weight ratio are crucial.
  • Medical Devices: Cycloidal gearboxes are used in medical equipment like robotic surgery systems for their precise movement capabilities and space-saving design.
  • Defense: Military applications, such as remotely operated vehicles and surveillance equipment, benefit from cycloidal gearboxes’ ability to handle rugged conditions and provide precise control.

These industries leverage the advantages of cycloidal gearboxes to enhance the performance and efficiency of their systems.

China Good quality Big Torque Cycloidal Gearbox   bevel gearbox	China Good quality Big Torque Cycloidal Gearbox   bevel gearbox
editor by CX 2024-05-14

China OEM Suit Impact and Loading Situations Cycloidal Gearbox with Motor Direct Input Types for Impact and Loading Situations gearbox design

Product Description

 Suit Impact and Loading Situations Cycloidal Gearbox with Motor Direct Input Types for Impact and Loading Situations

< ABOUT TILI

 

Technical data

 

Product Name Suit Impact and Loading Situations Cycloidal Gearbox with Motor Direct Input Types for Impact and Loading Situations
Power 0.18KW~90KW    
Torque 120Nm~30000Nm
Running direction Forward and reverse
Gear material Cast iron
Noise test Below 65dB
Brand of bearings C&U bearing, ZWZ, LYC, HRB, CHINAMFG , etc
Brand of oil seal NAK or other brand
Temp. rise (MAX) 40ºC  
Temp. rise (Oil)(MAX 50ºC  
Vibration ≤20µm
Housing hardness HBS190-240
Lubricating oil GB L-CKC220-460, Shell Omala220-460
Heat treatment Carburizing, Quenching etc
Efficiency 90% (depends on the transmission stage)
Installation type  Foot plate horizontal installation,  flange type vertical installation;
Input method Flange input(AM), shaft input(AD), inline AC motor input, or AQA servo motor

 

Installation Instructions

 

Company Profile

< WORKSHOP

< QUALITY CONTROL

 

Certifications

Packaging & Shipping

FAQ

 

Q 1: Are you a trading company or a manufacturer?
A: We are a professional manufacturer specializing in manufacturing various series of reducer.

Q 2:Can you do OEM?
A:Yes, we can. We can do OEM for all the customers .if you want to order NON-STANDERD speed reducers,pls provide Drafts, Dimensions, Pictures and Samples if possible.

Q 3: How long is your warranty?
A: Our Warranty is 12 months under normal circumstances.

Q 4: Do you have inspection procedures for reducer?
A:100% self-inspection before packing.

Q 5: Can I have a visit to your factory before the order?
A: Sure, welcome to visit our factory.

Q 6:How to choose a gearbox? What if I don’t know which gear reducer I need?
A:You can refer to our catalogue to choose the gearbox or we can help to choose when you provide,the technical information of required output torque, output speed and motor parameter etc. Don’t worry, Send as much information as you can, our team will help you find the right 1 you are looking for.

Q 7: What information shall we give before placing a purchase order?
A:a) Type of the gearbox, Size , Transmission Ratio, input and output type, input flange, mounting position, motor information and shaft deflection etc. b)Housing color.c) Purchase quantity. d) Other special requirements

Q 8:What is the payment term?
A:You can pay via T/T(30% in advance as deposit before production +70% before delivery

 

 

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Application: Motor, Machinery, Agricultural Machinery
Function: Distribution Power, Change Drive Torque, Speed Changing, Speed Reduction
Layout: Cycloidal
Customization:
Available

|

Customized Request

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.







about shipping cost and estimated delivery time.
Payment Method:







 

Initial Payment



Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

cycloidal gearbox

Variations in Cycloidal Gearbox Design

Cycloidal gearboxes come in various designs and configurations to cater to different application requirements. Some common variations include:

  • Single-Stage vs. Multi-Stage: Cycloidal gearboxes can be designed as single-stage or multi-stage systems. Single-stage designs offer a lower gear ratio and are suitable for applications with moderate torque requirements. Multi-stage designs provide higher gear ratios and are used for applications demanding higher torque output.
  • Input and Output Arrangements: Cycloidal gearboxes can have various input and output arrangements, including coaxial, inline, and right-angle configurations. These arrangements determine the orientation of the input and output shafts relative to each other.
  • Size and Torque Capacity: Different sizes of cycloidal gearboxes are available to accommodate a wide range of torque and power requirements. Smaller sizes are suitable for applications where space is limited, while larger sizes handle higher torque loads.
  • Mounting Options: Cycloidal gearboxes offer flexibility in mounting options, including base or flange mounting. This allows for easy integration into different types of machinery and equipment.
  • Material Selection: Depending on the application’s demands, cycloidal gearboxes can be constructed using various materials, such as steel, aluminum, and alloys. Material selection affects the gearbox’s durability and performance in different environments.
  • Backlash Reduction Mechanisms: Some cycloidal gearboxes feature enhanced backlash reduction mechanisms to further improve precision and accuracy in motion control applications.

These variations in design allow cycloidal gearboxes to be tailored to specific application requirements, making them versatile solutions for a wide range of industries and machinery.

cycloidal gearbox

Safety Measures for Operating Cycloidal Gear Systems

Operating cycloidal gear systems requires careful attention to safety to prevent accidents and ensure the well-being of operators and personnel. Here are important safety measures to consider:

  • Training: Provide proper training to operators and maintenance personnel on the operation, maintenance, and potential hazards associated with cycloidal gear systems.
  • Protective Equipment: Operators should wear appropriate personal protective equipment (PPE) such as gloves, safety glasses, and protective clothing.
  • Lockout-Tagout: Implement lockout-tagout procedures to ensure that the system is de-energized and isolated before any maintenance or repair work begins.
  • Regular Inspections: Conduct routine inspections of the gear system to identify any signs of wear, damage, or abnormalities that could compromise safety or performance.
  • Lubrication: Follow the manufacturer’s recommendations for lubrication to maintain optimal performance and prevent overheating.
  • Temperature Monitoring: Install temperature sensors or monitoring devices to detect any excessive heat buildup in the gearbox, which could indicate a potential issue.
  • Proper Ventilation: Ensure that the area where the gear system operates is well-ventilated to prevent the accumulation of heat or harmful fumes.
  • Emergency Stop: Install emergency stop buttons or switches that can immediately shut down the system in case of an emergency.
  • Clearance Zones: Establish clear clearance zones around the gear system to prevent accidental contact with moving parts.
  • Regular Maintenance: Follow a scheduled maintenance routine to keep the gear system in optimal working condition and address any potential safety concerns.
  • Operator Awareness: Ensure that operators are aware of the gear system’s potential hazards and safe operating practices.
  • Warning Signage: Clearly mark areas where the gear system operates with appropriate warning signs and labels.
  • Emergency Procedures: Develop and communicate clear emergency procedures to respond to accidents, malfunctions, or other unexpected events.

Prioritizing safety in the operation and maintenance of cycloidal gear systems is essential to prevent injuries and maintain a safe working environment.

cycloidal gearbox

Disadvantages of Using a Cycloidal Gearbox

While cycloidal gearboxes offer various advantages, they also come with some disadvantages that should be considered:

  • Lower Efficiency at High Speeds: Cycloidal gearboxes can experience a decrease in efficiency at high speeds due to increased friction and rolling resistance.
  • Complex Design: The internal arrangement of pins, lobes, and bearings can result in a relatively complex design, which may lead to higher manufacturing costs and maintenance challenges.
  • Limited Gear Ratio Range: Cycloidal gearboxes might have limitations in terms of achieving very high gear ratios, which can impact their suitability for certain applications.
  • Cost: The specialized design and precision manufacturing involved in producing cycloidal gearboxes can lead to higher upfront costs compared to other gearbox types.
  • Noise Generation: While generally quieter than some other types of gearboxes, cycloidal gearboxes can still produce noise during operation, which might need to be addressed in noise-sensitive applications.
  • Availability: Cycloidal gearboxes might not be as widely available as other gearbox types, potentially leading to longer lead times for procurement and replacement parts.
  • Limited Backlash Adjustability: While cycloidal gearboxes have minimal backlash, adjusting or fine-tuning the backlash might be more challenging compared to other gearbox types.

Despite these disadvantages, cycloidal gearboxes remain a valuable choice for specific applications where their unique advantages outweigh the drawbacks.

China OEM Suit Impact and Loading Situations Cycloidal Gearbox with Motor Direct Input Types for Impact and Loading Situations   gearbox design		China OEM Suit Impact and Loading Situations Cycloidal Gearbox with Motor Direct Input Types for Impact and Loading Situations   gearbox design
editor by CX 2024-05-14

China Custom Cycloidal Single Reduction Gearbox gearbox assembly

Product Description

Cycloidal Single Reduction Gearbox

< ABOUT TILI

 

Technical data

 

Product Name Cycloidal Single Reduction Gearbox
Power 0.18KW~90KW    
Torque 120Nm~30000Nm
Running direction Forward and reverse
Gear material Cast iron
Noise test Below 65dB
Brand of bearings C&U bearing, ZWZ, LYC, HRB, CHINAMFG , etc
Brand of oil seal NAK or other brand
Temp. rise (MAX) 40ºC  
Temp. rise (Oil)(MAX 50ºC  
Vibration ≤20µm
Housing hardness HBS190-240
Lubricating oil GB L-CKC220-460, Shell Omala220-460
Heat treatment Carburizing, Quenching etc
Efficiency 90% (depends on the transmission stage)
Installation type  Foot plate horizontal installation,  flange type vertical installation;
Input method Flange input(AM), shaft input(AD), inline AC motor input, or AQA servo motor

 

Installation Instructions

 

Company Profile

< WORKSHOP

< QUALITY CONTROL

 

Certifications

Packaging & Shipping

FAQ

 

Q 1: Are you a trading company or a manufacturer?
A: We are a professional manufacturer specializing in manufacturing various series of reducer.

Q 2:Can you do OEM?
A:Yes, we can. We can do OEM for all the customers .if you want to order NON-STANDERD speed reducers,pls provide Drafts, Dimensions, Pictures and Samples if possible.

Q 3: How long is your warranty?
A: Our Warranty is 12 months under normal circumstances.

Q 4: Do you have inspection procedures for reducer?
A:100% self-inspection before packing.

Q 5: Can I have a visit to your factory before the order?
A: Sure, welcome to visit our factory.

Q 6:How to choose a gearbox? What if I don’t know which gear reducer I need?
A:You can refer to our catalogue to choose the gearbox or we can help to choose when you provide,the technical information of required output torque, output speed and motor parameter etc. Don’t worry, Send as much information as you can, our team will help you find the right 1 you are looking for.

Q 7: What information shall we give before placing a purchase order?
A:a) Type of the gearbox, Size , Transmission Ratio, input and output type, input flange, mounting position, motor information and shaft deflection etc. b)Housing color.c) Purchase quantity. d) Other special requirements

Q 8:What is the payment term?
A:You can pay via T/T(30% in advance as deposit before production +70% before delivery

 

 

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Application: Motor, Machinery, Agricultural Machinery
Function: Distribution Power, Change Drive Torque, Speed Changing, Speed Reduction
Layout: Cycloidal
Customization:
Available

|

Customized Request

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.







about shipping cost and estimated delivery time.
Payment Method:







 

Initial Payment



Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

cycloidal gearbox

Suitability of Cycloidal Gearboxes for High-Torque Applications

Cycloidal gearboxes are well-suited for high-torque applications due to their unique design and mechanical advantages. Here’s why they are suitable:

  • Multiple Engagement Points: Cycloidal gearboxes have multiple teeth in contact at any given moment, distributing the load over a larger area. This reduces wear and stress on individual teeth, making them capable of handling high torque.
  • High Load-Carrying Capacity: The design of the cycloidal mechanism, with its large number of pins and rollers, provides high load-carrying capacity. This makes them capable of transmitting significant torque without failure.
  • Tight Tolerances: The precision and tight tolerances in the construction of cycloidal gearboxes ensure smooth and efficient power transmission even under heavy loads.
  • Compact Design: Cycloidal gearboxes achieve high torque in a relatively compact size. This is particularly advantageous in applications where space is limited.
  • High Gear Ratio: Cycloidal gearboxes can achieve high gear ratios, allowing them to convert lower input speeds into higher output torque, which is essential in high-torque applications.

These factors make cycloidal gearboxes a reliable choice for various high-torque applications across industries such as heavy machinery, robotics, material handling, and more.

cycloidal gearbox

Use of Cycloidal Gearboxes in Precision Applications

Cycloidal gearboxes are well-suited for precision applications due to their unique design and capabilities. Here’s why they are used in precision settings:

  • High Positional Accuracy: Cycloidal gearboxes offer high positional accuracy, making them suitable for applications that require precise positioning and movement.
  • Backlash Reduction: The design of cycloidal gearboxes minimizes backlash, ensuring that there is minimal play between gears. This is crucial for maintaining accuracy in precision applications.
  • Smooth and Controlled Motion: Cycloidal gearboxes provide smooth and controlled motion with minimal vibration, which is essential for delicate operations and precision machinery.
  • Compact Design: Their compact design allows cycloidal gearboxes to be integrated into tight spaces without sacrificing performance. This is especially valuable in applications where space is limited.
  • Repeatable Performance: Cycloidal gearboxes offer consistent and repeatable performance, which is vital for maintaining precision over multiple cycles.
  • Low Backlash: The low backlash characteristic of cycloidal gearboxes ensures that there is minimal lost motion, contributing to their precision performance.
  • High Torque Density: Despite their compact size, cycloidal gearboxes can handle high torque loads, making them suitable for applications that require both precision and power.
  • Reduced Wear: The rolling contact design of cycloidal gears reduces wear and extends the lifespan of the gearbox, which is crucial for precision applications that demand consistent performance over time.

Overall, cycloidal gearboxes are a reliable choice for precision applications that require accurate positioning, controlled motion, and consistent performance.

cycloidal gearbox

Common Applications of Cycloidal Gearboxes

Cycloidal gearboxes find their application in various industries and scenarios where their unique features are advantageous:

  • Robotics: Cycloidal gearboxes are often used in robotic joints and manipulators due to their compact size, high torque capacity, and precision movement.
  • Conveyor Systems: Their ability to handle heavy loads and provide accurate motion makes cycloidal gearboxes suitable for conveyor systems in industries such as manufacturing, food processing, and material handling.
  • Aerospace: In aerospace applications, cycloidal gearboxes are used in satellite mechanisms, aerospace actuators, and precision motion control systems.
  • Medical Devices: The compact design and precise motion capabilities of cycloidal gearboxes are beneficial in medical equipment such as surgical robots and diagnostic devices.
  • Textile Industry: Cycloidal gearboxes are utilized in textile machines for their ability to provide accurate and synchronized movement in the weaving and knitting processes.
  • Automotive: Some automotive applications, such as sunroof mechanisms and power seats, can benefit from the compact size and high torque capacity of cycloidal gearboxes.
  • Printing Industry: The precision and reliability of cycloidal gearboxes are important in printing presses to ensure accurate paper feeding and positioning.
  • Packaging Machinery: In packaging equipment, cycloidal gearboxes can provide the required torque and accuracy for tasks like sealing, labeling, and filling.

These are just a few examples of where cycloidal gearboxes are commonly used, demonstrating their versatility and adaptability across various industries.

China Custom Cycloidal Single Reduction Gearbox   gearbox assembly	China Custom Cycloidal Single Reduction Gearbox   gearbox assembly
editor by CX 2024-05-08

China high quality Cycloidal Gearbox Suited to Heavy Industry High Torque Stop/Start Applications. with Best Sales

Product Description

Cycloidal Gearbox Suited to Heavy Industry High Torque Stop/Start Applications.

< ABOUT TILI

 

Technical data

 

Product Name Cycloidal Gearbox Suited to Heavy Industry High Torque Stop/Start Applications.
Power 0.18KW~90KW    
Torque 120Nm~30000Nm
Running direction Forward and reverse
Gear material Cast iron
Noise test Below 65dB
Brand of bearings C&U bearing, ZWZ, LYC, HRB, CHINAMFG , etc
Brand of oil seal NAK or other brand
Temp. rise (MAX) 40ºC  
Temp. rise (Oil)(MAX 50ºC  
Vibration ≤20µm
Housing hardness HBS190-240
Lubricating oil GB L-CKC220-460, Shell Omala220-460
Heat treatment Carburizing, Quenching etc
Efficiency 90% (depends on the transmission stage)
Installation type  Foot plate horizontal installation,  flange type vertical installation;
Input method Flange input(AM), shaft input(AD), inline AC motor input, or AQA servo motor

 

Installation Instructions

 

Company Profile

< WORKSHOP

< QUALITY CONTROL

 

Certifications

Packaging & Shipping

FAQ

 

Q 1: Are you a trading company or a manufacturer?
A: We are a professional manufacturer specializing in manufacturing various series of reducer.

Q 2:Can you do OEM?
A:Yes, we can. We can do OEM for all the customers .if you want to order NON-STANDERD speed reducers,pls provide Drafts, Dimensions, Pictures and Samples if possible.

Q 3: How long is your warranty?
A: Our Warranty is 12 months under normal circumstances.

Q 4: Do you have inspection procedures for reducer?
A:100% self-inspection before packing.

Q 5: Can I have a visit to your factory before the order?
A: Sure, welcome to visit our factory.

Q 6:How to choose a gearbox? What if I don’t know which gear reducer I need?
A:You can refer to our catalogue to choose the gearbox or we can help to choose when you provide,the technical information of required output torque, output speed and motor parameter etc. Don’t worry, Send as much information as you can, our team will help you find the right 1 you are looking for.

Q 7: What information shall we give before placing a purchase order?
A:a) Type of the gearbox, Size , Transmission Ratio, input and output type, input flange, mounting position, motor information and shaft deflection etc. b)Housing color.c) Purchase quantity. d) Other special requirements

Q 8:What is the payment term?
A:You can pay via T/T(30% in advance as deposit before production +70% before delivery

 

 

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Application: Motor, Machinery, Agricultural Machinery
Function: Distribution Power, Change Drive Torque, Speed Changing, Speed Reduction
Layout: Cycloidal
Customization:
Available

|

Customized Request

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.







about shipping cost and estimated delivery time.
Payment Method:







 

Initial Payment



Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

cycloidal gearbox

Suitability of Cycloidal Gearboxes for High-Torque Applications

Cycloidal gearboxes are well-suited for high-torque applications due to their unique design and mechanical advantages. Here’s why they are suitable:

  • Multiple Engagement Points: Cycloidal gearboxes have multiple teeth in contact at any given moment, distributing the load over a larger area. This reduces wear and stress on individual teeth, making them capable of handling high torque.
  • High Load-Carrying Capacity: The design of the cycloidal mechanism, with its large number of pins and rollers, provides high load-carrying capacity. This makes them capable of transmitting significant torque without failure.
  • Tight Tolerances: The precision and tight tolerances in the construction of cycloidal gearboxes ensure smooth and efficient power transmission even under heavy loads.
  • Compact Design: Cycloidal gearboxes achieve high torque in a relatively compact size. This is particularly advantageous in applications where space is limited.
  • High Gear Ratio: Cycloidal gearboxes can achieve high gear ratios, allowing them to convert lower input speeds into higher output torque, which is essential in high-torque applications.

These factors make cycloidal gearboxes a reliable choice for various high-torque applications across industries such as heavy machinery, robotics, material handling, and more.

cycloidal gearbox

History of Cycloidal Gear System Development

The history of cycloidal gear systems dates back to ancient times, with various forms of non-circular gears being used for specialized applications. The concept of the cycloidal gear system as we know it today, however, has evolved over centuries of engineering and innovation:

  • Ancient Roots: The concept of using non-circular gears can be traced back to ancient civilizations, where devices like the “Antikythera Mechanism” (c. 150-100 BC) employed non-circular gear arrangements.
  • Cam Mechanisms: During the Renaissance, engineers and inventors like Leonardo da Vinci explored mechanisms involving cams and followers, which are precursors to modern cycloidal gears.
  • Cycloidal Motion Studies: In the 19th century, engineers and mathematicians like Franz Reuleaux and Robert Willis studied and developed mechanisms based on the principles of cycloidal motion.
  • Early Cycloidal Gearboxes: The development of cycloidal gear systems gained momentum in the late 19th and early 20th centuries, with inventors like Emile Alluard and Louis André creating early forms of cycloidal gear mechanisms and gearboxes.
  • Cycloidal Drive: The term “cycloidal drive” was coined by James Watt in the 18th century, referring to mechanisms that produce a motion resembling a rolling circle.
  • Modern Cycloidal Gearboxes: The development of modern cycloidal gearboxes was further advanced by engineers like Ralph B. Heath, who patented the “Harmonic Drive” in the 1950s. This invention marked a significant step in the advancement and commercialization of precision cycloidal gear systems.
  • Advancements and Applications: Over the decades, cycloidal gear systems have found applications in robotics, aerospace, automation, and other fields that require compactness, precision, and high torque capabilities.

The history of cycloidal gear system development reflects the contributions of many engineers and inventors who have refined and advanced the technology over time. Today, cycloidal gearboxes continue to play a crucial role in various industries and applications.

cycloidal gearbox

Common Applications of Cycloidal Gearboxes

Cycloidal gearboxes find their application in various industries and scenarios where their unique features are advantageous:

  • Robotics: Cycloidal gearboxes are often used in robotic joints and manipulators due to their compact size, high torque capacity, and precision movement.
  • Conveyor Systems: Their ability to handle heavy loads and provide accurate motion makes cycloidal gearboxes suitable for conveyor systems in industries such as manufacturing, food processing, and material handling.
  • Aerospace: In aerospace applications, cycloidal gearboxes are used in satellite mechanisms, aerospace actuators, and precision motion control systems.
  • Medical Devices: The compact design and precise motion capabilities of cycloidal gearboxes are beneficial in medical equipment such as surgical robots and diagnostic devices.
  • Textile Industry: Cycloidal gearboxes are utilized in textile machines for their ability to provide accurate and synchronized movement in the weaving and knitting processes.
  • Automotive: Some automotive applications, such as sunroof mechanisms and power seats, can benefit from the compact size and high torque capacity of cycloidal gearboxes.
  • Printing Industry: The precision and reliability of cycloidal gearboxes are important in printing presses to ensure accurate paper feeding and positioning.
  • Packaging Machinery: In packaging equipment, cycloidal gearboxes can provide the required torque and accuracy for tasks like sealing, labeling, and filling.

These are just a few examples of where cycloidal gearboxes are commonly used, demonstrating their versatility and adaptability across various industries.

China high quality Cycloidal Gearbox Suited to Heavy Industry High Torque Stop/Start Applications.   with Best Sales China high quality Cycloidal Gearbox Suited to Heavy Industry High Torque Stop/Start Applications.   with Best Sales
editor by CX 2024-05-07

China Best Sales CZPT Arrow Sale Plastic Twin Screw Extruder Machine Twin Screw Gearbox best automatic gearbox

Product Description

Overview

Product Description 

Wide Selection of Gearbox Products
The gearbox usually adopts a general design scheme, but in special cases, the design scheme of the gearbox can be changed according to the demands of the user, and it can be modified into an industry-specific gearbox. In the design scheme of the gearbox, the parallel shaft, vertical shaft, general box, and various parts can be changed

Advantages

  • Absorption of very high torques and axial forces
  • No need for separate thrust housing & bearing.
  • Easy alignment (screw directly fits into the vore of gear box)
  • Easy to assemble & dismantle.
  • Very heavy duty spherical roller thrust bearing is provided.
  • Power saving. (you may save up to 20 % power.)
  • Less requirement of space.
  • For bigger sizes water cooling is provided 
  • No maintenance required except periodic oil level checking.
  • Higher productivity 

Features

 

  • Twin Screw Extruder Gearboxes offer the dual shaft counter rotating. The range is available for various center distances
  • The gearboxes are available with co-rotating and counter rotating variants
  • To work under heavy loading force, the high level dissipation and oil lubrication system are provided. The axial roller type swivel thrust with the thrust bearing coupled in tandem way support the axial thrust
  • High torque and high speed output rate

 

Processing Characteristics of Screw Shaft:

1.Suitable suggestion on material to ensure components performance and extend lifetime of products.
2.Professional technical team can provide surveying and mapping support.
3.All components are finished by CNC machine.
4.Sophisticated quality management system ensure superior quality.
 

Basic Info.
 

Warranty: 1 year Weight (KG):
500 KG
Place of Origin:
HangZhou, China
Gearing Arrangement:
helical
ratio:
8-20
Output Torque:
2*176
 
standard:
JB/T8853-2001
Certificate:
CE
Heat treatment:
High-frequency Hardening
Efficiency:
94%~98%(depends on the transmission stage)
Customized support:OEM ODM Input/output shaft material
40Cr
Package:
Wooden case
 
Mount position:
Flange, hollow shaft, CHINAMFG shaft
After-sale:Online 24/7 Installation Xihu (West Lake) Dis. advantage:
excellent quality
Reduction radio:
3:1
 
Mount Position:
Horizontal Foot Mounted Vertical
 
Input Speed:
1500
 
Output Speed:
500
 

Packaging & delivery

Packing: wooden case packing

 
Port: HangZhou Port  

Applications
X helical gear units for double-screw extruders with parallel drive shafts and the same direction of screw rotation are used mainly in the manufacture of granulates and the refining of raw plastics. Other areas of application include:

  • Paint and lacquer industry
  • Washing agent industry
  • Foodstuff industry (e.g. bread, pasta)
  • Animal-feed industry (dog, cat other animal food 

Maintenance of the gearbox of the dual-screw extruder
1. The gear box of the dual-screw extruder should be well-ventilated, and the working environment temperature should be within the range of 5-35 °C.
2. Always check the oil quantity of the gear lubricating oil in the box to ensure that the transmission parts in the box are well lubricated.
3. Pay attention to check the bearing parts of the box frequently. The oil temperature of the oil tank of the transmission box should not exceed 70 ºC during operation.
4. The newly put into use gearbox needs to replace the lubricating oil after 250 hours of operation. The oil change time depends on the state of the oil. It is recommended to replace it after 4000-8000 hours of operation or once a year.
5. The gearbox of the dual-screw extruder needs to be regularly maintained and inspected once a year 

Operating Process
1. The gear on the input shaft is driven by the motor and starts to rotate.
2. The rotating input gear meshes with other gears inside the gearbox, transmitting power.
3. Different-sized gears within the gearbox are combined to form a gear train. Through continuous meshing and rotation, the high-speed, low-torque power from the input shaft gradually converts into low-speed, high-torque output.
4. The output shaft is connected to the last gear and transfers the output torque to the load.
5. Gear reduction gearboxes typically include lubrication and cooling systems to ensure smooth operation and prevent overheating and damage.
6. Our extruder gearbox converts high-speed, low-torque power into low-speed, high-torque output by changing the size ratios and meshing arrangements of different gears, achieving the function of speed reduction.

Types of Gearboxes:
Based on customer requirements, gear reduction gearboxes can be classified according to the size of the output shaft, center distance of the output shaft, output speed, and torque. Alternatively, we can provide several commonly used types of gearboxes for customers to choose from.

Product Service

24-hour Hotline

 

No matter when and where

to call we can find our service to you.

 

 

Pre-sales Consultation

 

We have 5 sales people online,

and whether you have any question

can be solved through online

communication.

After-sales Services

 

Receive products have any

questions about the product,

can look for us,we will help

you deal with the the first time,to your satisfaction.

Exhibition

Certificate

Company profile
ZheJiang Arrow Machinery Co., Ltd.is a company specializing in R&D, production, sales, application promotion of food engineering projects. As 1 of the largest scaled food processing equipment &whole plant engineering problem solvers in China, machines served for more than 970 companies, export to 116 countries, area, more than 20 years engineering team, we recognize that quality equals value, aims to create a great future together with global customers.

FAQ

 

1.  Q: How about Arrow Machinery?

     R: ZheJiang Arrow Machinery Co., Ltd. is a High-Tech company. Our firm is composed of a strong  

        team which has substantial experience in R&D, manufacture, technique and sales service and has

        specialized in extruder industry for 10 years,leading screw barrel manufacturer in China.
2. Q:What’s Arrow machinery’s capacity? 
    R:Company is in strict accordance with CE and ISO9001 quality certification system.There are over 200

       models of extruders and spare parts. 

3. Q:What’s the delivery time? 

    R:For regular size, we have finished stock and semi-finished stock, 2 weeks max enough

        for customized, normally within 20days .

4. Q:How about the gearbox quality and price? 
    R: top quality in China with competitive price and globle after-sale service
5. Q:what’s the life time and guarantee buy from Arrow machinery ?
    R: 3~5years life time for nitriding ones and bimtallic ones will be longer 
        One year min. Guarantee.
6.Q:Where is Arrow Machinery factory and how to reach there? 
   R:NO.47 Chengbohu Road, Xihu (West Lake) Dis. District,HangZhou City, China. You can take the train or plane to HangZhou and we can pick        you up.
7.Q:How to contact with you? 
   R:just reply to me if have any question. 

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Application: Motor, Machinery
Function: Distribution Power, Change Drive Torque, Change Drive Direction, Speed Changing, Speed Reduction, Speed Increase
Layout: Cycloidal
Samples:
US$ 99999/Piece
1 Piece(Min.Order)

|

Order Sample

Customization:
Available

|

Customized Request

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.







about shipping cost and estimated delivery time.
Payment Method:







 

Initial Payment



Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

cycloidal gearbox

Calculation of Reduction Ratio in a Cycloidal Gearbox

The reduction ratio in a cycloidal gearbox can be calculated using the following formula:

Reduction Ratio = (Number of Input Pins + Number of Output Pins) / Number of Output Pins

In a cycloidal gearbox, the input pins engage with the lobes of the cam disc, while the output pins are engaged with the cycloidal pins of the output rotor. The reduction ratio determines the relationship between the number of input and output pins engaged at any given time.

For example, if a cycloidal gearbox has 7 input pins and 14 output pins engaged, the reduction ratio would be:

Reduction Ratio = (7 + 14) / 14 = 1.5

This means that for every 1 revolution of the input pins, the output rotor will complete 1.5 revolutions. The reduction ratio is a key parameter that influences the output speed and torque of the cycloidal gearbox.

cycloidal gearbox

Maintenance Requirements for Cycloidal Gearboxes

Maintaining cycloidal gearboxes is essential to ensure their optimal performance and longevity. Here are some maintenance practices to consider:

  • Lubrication: Regular lubrication is crucial to prevent wear and friction between moving parts. Use high-quality lubricants recommended by the gearbox manufacturer.
  • Inspections: Regularly inspect the gearbox for signs of wear, damage, or oil leakage. Address any issues promptly to prevent further damage.
  • Cleaning: Keep the gearbox clean and free from debris that could interfere with its operation. Cleanliness helps prevent contamination and wear.
  • Torque Checks: Periodically check the tightness of fasteners and bolts to ensure they are properly secured. Loose fasteners can lead to misalignment and reduced performance.
  • Seal Maintenance: Check and maintain seals to prevent oil leakage. Damaged seals should be replaced promptly to avoid lubricant loss.
  • Temperature Monitoring: Monitor the operating temperature of the gearbox to ensure it remains within the recommended range. Excessive heat can lead to premature wear.
  • Alignment: Ensure that the gearbox is properly aligned with other components to prevent misalignment-related issues.
  • Regular Service: Follow the manufacturer’s recommended service intervals for more in-depth inspections and maintenance tasks.

Regular and proactive maintenance can extend the lifespan of cycloidal gearboxes, minimize downtime, and maintain their efficiency and performance over time.

cycloidal gearbox

Industries Benefiting from Cycloidal Gearboxes

Cycloidal gearboxes find applications in various industries where their unique characteristics are advantageous:

  • Robotics and Automation: Cycloidal gearboxes are widely used in robotic systems for their compact design, high torque capacity, and precise motion control.
  • Material Handling: Industries such as logistics and warehousing benefit from cycloidal gearboxes in conveyor systems due to their ability to handle heavy loads and provide smooth and accurate movement.
  • Manufacturing: Equipment used in manufacturing processes, such as packaging machines and printing presses, often incorporate cycloidal gearboxes for their reliability and precise positioning.
  • Aerospace: In aerospace applications, cycloidal gearboxes can be found in satellite systems, where their compactness and high torque-to-weight ratio are crucial.
  • Medical Devices: Cycloidal gearboxes are used in medical equipment like robotic surgery systems for their precise movement capabilities and space-saving design.
  • Defense: Military applications, such as remotely operated vehicles and surveillance equipment, benefit from cycloidal gearboxes’ ability to handle rugged conditions and provide precise control.

These industries leverage the advantages of cycloidal gearboxes to enhance the performance and efficiency of their systems.

China Best Sales CZPT Arrow Sale Plastic Twin Screw Extruder Machine Twin Screw Gearbox   best automatic gearbox	China Best Sales CZPT Arrow Sale Plastic Twin Screw Extruder Machine Twin Screw Gearbox   best automatic gearbox
editor by CX 2024-05-07